Abstract:A significant challenge is posed in improving the thermal performance of heat exchangers by the reduction of the outlet temperature. To confront this intricacy, distinct water‐based nanofluids with two different material conditions are employed by the established framework. Through comprehensive examination, a novel framework has been developed that offers improved thermal performance by reducing the outlet temperature and providing enhanced cooling compared to other working fluids. Valuable insights into optimizing thermal management systems are demonstrated. Researchers and engineers are actively working on enhancing the efficiency of heat exchangers in engineering applications by developing novel designs, exploring new materials, and utilizing nanofluids. Three kinds of nanofluids with varying concentrations are investigated in this paper. The objective is to assess the performance of N‐shaped double‐pipe heat exchanger used in thermoelectric power plants. The performance has been evaluated using COMSOL Multiphysics software. The findings show that higher nanofluid concentrations resulted in elevated heat transfer coefficients and improved efficiency of N‐shape double pipe heat exchanger. The analysis revealed that a mere 1% rise in the volume fraction of nanofluids enhanced the efficiency of the heat exchanger on average 23% when compared to the base fluid (water). In comparison to the N‐shape double pipe (Inconel 625) heat exchangers, the N‐shape double pipe (copper) heat exchangers appear to be more efficient. The introduction of nanoparticles has a notable impact on the heat transfer coefficients. Specifically, within an N‐shaped double pipe (copper) heat exchanger, the inclusion of a 1% volume fraction results in a 2.09% enhancement in the heat transfer coefficient for Al2O3/water, a 1.3% improvement for Fe3O4/water, and a 1.15% increase for TiO2/water. It also exposed that adding 1% Al2O3/water led to a significant 0.623% increase in effectiveness, while TiO2/water showed a 0.259% rise, and Fe3O4/water exhibited a 0.375% improvement. Moreover, increasing the Reynolds number enhances the Nusselt number for Al2O3/water and Fe3O4/water nanofluids by 55.22%, and for TiO2/water by 54.60% at a 6% volume concentration, leading to additional increases in exchanger efficiency. Therefore, the augmentation in nanofluid concentration leads to a reduction in the temperature pinch points both at the intake and outflow. This observation suggests that nanofluids exhibit a superior ability compared to conventional fluids when it comes to effectively lowering temperatures.

Parametric analysis of different Al2O3 nanoparticle shapes and expansion angles for sudden expanded tube regarding the first law of thermodynamics

Evaluation of nanoparticle shape factor on a laminar forced convective heat transfer characteristics of various nanofluids flow in a tube using single-phase numerical model

Friction Factor and Heat Transfer of Nanofluid in the Turbulent Flow Through a 90° Bend

Numerically analyzed of ternary hybrid nanofluids flow of heat and mass transfer subject to various shapes and size factors in two-dimensional rotating porous channel

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Numerical study of the effects of geometric parameters and nanofluid properties on heat transfer and pressure drop in helical tubes

Thermo-hydraulic and entropy generation analysis of nanofluid flow with variable properties in various duct cross sections: a 3-D two-phase approach

Thermal-hydraulic performance of a nanofluid in a shell-and-tube heat exchanger equipped with new trapezoidal inclined baffles: Nanoparticle shape effect

Thermal performance augmentation in a pipe employing hybrid nanofluid and a plate as turbulator with V-shaped double-winglet ribs

Various nanoparticle shapes and quadratic velocity impacts on entropy generation and MHD flow over a stretching sheet with joule heating

Numerical Study of Flow and Heat Transfer Characteristics for Al2O3 Nanofluid in a Double-Pipe Helical Coil Heat Exchanger

Numerical study on performance enhancement of the fin and tube heat exchanger using different nanoparticle shapes

Entropy and thermal performance on shape-based 3D tri-hybrid nanofluid flow due to a rotating disk with statistical analysis

Performance Analysis of Solar Water Heater Using Al2O3 NanoParticle with Plain-Dimple Tube Design

Enhanced heat transfer analysis on Ag-Al[Formula: see text]O[Formula: see text]/water hybrid magneto-convective nanoflow

Dynamics of nanoparticle diameter and solid–liquid interfacial layer on the Al2O3–H2O nanofluid flow over a uni-directional extending heated surface: a numerical analysis

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Experimental investigation of heat transfer performance of Al2O3 nanofluids in a compact plate heat exchanger

Investigation of unsteady nanofluid over half infinite domain under the action of parametric effects and EPNM

Thermal and hydraulic characteristics of TiO2/water nanofluid flow in tubes possessing internal trapezoidal and triangular rib shapes

Effect of Al2O3/water nanofluid on performance of parallel flow heat exchangers