Abstract:A significant challenge is posed in improving the thermal performance of heat exchangers by the reduction of the outlet temperature. To confront this intricacy, distinct water‐based nanofluids with two different material conditions are employed by the established framework. Through comprehensive examination, a novel framework has been developed that offers improved thermal performance by reducing the outlet temperature and providing enhanced cooling compared to other working fluids. Valuable insights into optimizing thermal management systems are demonstrated. Researchers and engineers are actively working on enhancing the efficiency of heat exchangers in engineering applications by developing novel designs, exploring new materials, and utilizing nanofluids. Three kinds of nanofluids with varying concentrations are investigated in this paper. The objective is to assess the performance of N‐shaped double‐pipe heat exchanger used in thermoelectric power plants. The performance has been evaluated using COMSOL Multiphysics software. The findings show that higher nanofluid concentrations resulted in elevated heat transfer coefficients and improved efficiency of N‐shape double pipe heat exchanger. The analysis revealed that a mere 1% rise in the volume fraction of nanofluids enhanced the efficiency of the heat exchanger on average 23% when compared to the base fluid (water). In comparison to the N‐shape double pipe (Inconel 625) heat exchangers, the N‐shape double pipe (copper) heat exchangers appear to be more efficient. The introduction of nanoparticles has a notable impact on the heat transfer coefficients. Specifically, within an N‐shaped double pipe (copper) heat exchanger, the inclusion of a 1% volume fraction results in a 2.09% enhancement in the heat transfer coefficient for Al2O3/water, a 1.3% improvement for Fe3O4/water, and a 1.15% increase for TiO2/water. It also exposed that adding 1% Al2O3/water led to a significant 0.623% increase in effectiveness, while TiO2/water showed a 0.259% rise, and Fe3O4/water exhibited a 0.375% improvement. Moreover, increasing the Reynolds number enhances the Nusselt number for Al2O3/water and Fe3O4/water nanofluids by 55.22%, and for TiO2/water by 54.60% at a 6% volume concentration, leading to additional increases in exchanger efficiency. Therefore, the augmentation in nanofluid concentration leads to a reduction in the temperature pinch points both at the intake and outflow. This observation suggests that nanofluids exhibit a superior ability compared to conventional fluids when it comes to effectively lowering temperatures.

Experimental investigation of heat transfer performance of Al2O3 nanofluids in a compact plate heat exchanger

Comparisons of Numerical and Experimental Investigations of the Thermal Performance of Al2O3 and TiO2 Nanofluids in a Compact Plate Heat Exchanger

Experimental investigation of the performance of the plate heat exchanger using (Multi-Walled Carbon Nanotubes–Al2O3/water) hybrid nanofluid

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Numerical Study of Flow and Heat Transfer Characteristics for Al2O3 Nanofluid in a Double-Pipe Helical Coil Heat Exchanger

Experimental investigation of a novel heat exchanger for optimizing heat transfer performance using Al2O3-water nanofluids

Heat Transfer Characteristics of Plate Heat Exchanger with Bubble Fin Using Al2O3/Water Nanofluid: Numerical Investigation

Experimental study on the heat transfer and flow properties of γ-Al2O3/water nanofluid in a double-tube heat exchanger

Effect of Al2O3/water nanofluid on performance of parallel flow heat exchangers

Experimentation with different alumina hybrid (50:50) suspensions as coolant on plate heat exchanger performance

Experimental and numerical investigation of flow and thermal characteristics of aluminum block exchanger using surface-modified and recycled nanofluids

Experimental studies on the effect of Al2O3 + water nanofluid concentrations on dimensionless heat transfer parameters in a cleanroom air handling unit

Experimental investigation on the performance of hybrid Fe3O4 coated MWCNT/Water nanofluid as a coolant of a Plate heat exchanger

Computational investigation on the energy efficiency of heat exchangers using Al2O3 nanofluids

Numerical study of heat transfer, exergy efficiency, and friction factor with nanofluids in a plate heat exchanger

Heat Transfer Enhancement Using Al2O3-MWCNT Hybrid-Nanofluid inside a Tube/Shell Heat Exchanger with Different Tube Shapes

Experimental investigation on alumina nanofluids in vehicle heat exchanger

Heat transfer characteristics of plate heat exchanger using hybrid nanofluids: effect of nanoparticle mixture ratio

Study the effect of hot fluid flow rate and carbon nanotube–water on the performance of nanofluid in gasketed plate heat exchanger

Experimental Investigation of Al2O3/Water Nanofluid Through Equilateral Triangular Duct with Constant Wall Heat Flux in Laminar Flow