Abstract:A transportable fluoride-salt-cooled high-temperature reactor (TFHR) design with 20-MW(thermal) rated power and 18-month fuel cycle is proposed for off-grid applications. One of the design goals of the compact reactor core is potential transport by truck, rail, or air. Full-core thermal-hydraulic analyses and improvements using three-dimensional computational fluid dynamics (CFD) were performed previously to demonstrate the feasibility of a TFHR design at a nominal power of 20 MW(thermal). In this paper, the bestestimate system code Reactor Excursion Leak Analysis Program (RELAP5-3D) is adopted to study the transient behavior of this TFHR design and the safety characteristics of the primary loop system during accident conditions. The modeling results of the steady state were verified using CFD results with consideration of radial heat conduction between heat transfer unit cells. Four most challenging accidents of anticipated transient without scram were analyzed, as well as parametric studies of some key factors. These accidents include unprotected reactivity insertion accident (URIA), unprotected loss of heat sink (ULOHS), unprotected loss of flow (ULOF), and a combination accident of ULOF and ULOHS. The results indicate that transient temperature limits are not exceeded during the most severe accidents. They indicate satisfactory transient performance of the TFHR design. The transient temperature limit of structure material Hastelloy N, based on embrittlement phenomena, poses the most limiting constraint due to the small temperature margin of about 20 K in the accident combination of ULOF and ULOHS. Overall, TFHR is a sound reactor design from a thermal-hydraulic viewpoint.

Research on the Characteristics of a High-temperature Superconducting Leakage Flux-controlled Reactor

Research on DC Magnetic Flux Controllable Reactor

THE CFD SIMULATION RESEARCH ON HYDRAULIC TRANSFORMER

Steady-state Modeling of Controllable Shunt Reactor of Transformer Type

Research and Engineering Application of Controllable Line Commutated Converter Valve-Control System

Investigation on the Characteristics of a High Speed Repulsion Mechanism for Wide-Range Operation of Resistive Type SFCL

Analysis on winding current of controllable reactor of transformer type

High Flux Reactor Review and Reactivity Control Analysis

Design and Analysis of High Temperature Superconducting Current Leads for CRAFT TF Magnet

Design and Evaluation of a Novel Non-Inductive Unit for a High Temperature Superconducting Fault Current Limiter (SFCL) with Bias Magnetic Field

Recent progress of superconducting fault current limiter in China

Study on Heat Leakage of Current Leads of 300 Kva HTS Transformer

R&D ON SHUNT FOR HIGH SAFETY HTS CURRENT LEADS FOR ITER

Research on harmonic suppression characteristics and control methods for low-frequency resonance suppressor

Transient Safety Analysis of A Transportable Fluoride-Salt-Cooled High-Temperature Reactor Using Relap5-3d

Investigations on Quench Recovery Characteristics of High-Temperature Superconducting Coated Conductors for Superconducting Fault Current Limiters

The Improved Topology and Control Strategy for the HCLC in the Multiterminal Flexible DC Grid

Design of High Voltage, High Power and High Frequency Transformer in Lcc Resonant Converter

Mechanical & Thermal Stress Analysis under Actual Condition and Test Design of 550kv High Coupled Split Reactor

Electromagnetic Thermal Analysis on Variable Resistive-type Superconducting Fault Current Limiter

Transient thermal hydraulic analysis of a small passive lead–bismuth eutectic cooled fast reactor