Abstract:DC short-circuit fault is a crucial issue in DC grids because the DC fault current increases rapidly with accompanying high fault energy. Limiting the DC fault current is a promising solution to simplify the design of the DC breaker and DC protection. The majority of existing DC fault current limiting (FCL) approaches relies on extra devices, such as DC line inductors. However, the control ability of modular multilevel converters (MMCs) is not optimized. In this study, the submodule (SM) capacitor dynamics during the short DC fault procedure was considered a new control objective, and its effect on the limiting DC fault current was analyzed and revealed. The complex time-varying DC fault transient circuit was comprehensively represented by introducing two base circuit structures and one duty cycle index D. The averaged circuit model was proposed on the basis of the state–space averaging method, which can intuitively show the relation between SM capacitor and DC fault current. The analytical expressions of the DC fault current was given, which can guide the design of the DC FCL control of MMC. The duty cycle index D can represent the discharge of SM capacitors, and the increasing speed of the DC fault current declines with the decrease in D. Accordingly, a feasible FCL control strategy was proposed by choosing D as a tool for affecting and controlling the DC fault current. The proposed FCL control strategy can evidently reduce dc fault current, and avoid the drawbacks of the conventional block or bypass approaches. The simulation results validated the effectiveness of the proposed analysis method and corresponding conclusions.

HVdc Reactor Reduction Method Based on Virtual Reactor Fault Current Limiting Control of MMC

Centralized Locating Strategy of Fault Current Limiters in MMC-Based Multiterminal HVdc Grid

A Comprehensive Control Method with Model Predictive Function of MMC-HVDC System under Unbalanced Grid Faults

A new approach for suppressing DC voltage ripples of MMC-HVDC

Low Frequency Operation Control Method for Modular Multilevel Converter Based on Improved Arm Current Prediction

A Calculation Method Of Analytical Dc Fault Current In Mmc-Hvdc Grid Including Current-Limiting Devices

Redundancy Fault-tolerated Control Strategy for Sub-module Faults of Modular Multilevel Converters

A MMC Topology with AC Short-Circuit Fault Ride-Through Capability and its Control Strategies

Hybrid injection strategy of sub-module voltage ripple suppression for MMC under low frequency operation

Start/Stop Control of Modular Multilevel Converter Based HVDC Transmission System

DC Fault Current Limiting Effect of MMC Submodule Capacitors

AC and DC Current Hybrid Control Strategy for Modular Multilevel Converter

An Adaptive Fault Current Limiting Control for MMC and Its Application in DC Grid

A Rotation-Based Capacitor-Voltage-balancing Method for Modular Multilevel Converters

Capacitance Reduction Control for Sub-module of Modular Multilevel Converter Applied in Wind Power Generation

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

Control of Modular Multilevel Converter Under Imbalance of AC Power System

Enhanced Ride-Through Capability under Rectifier-Side AC Fault for Series LCC-MMC Hybrid HVDC System

Fault-tolerant strategy for modular multilevel converter with nearest level modulation in HVDC system

The Improved Topology and Control Strategy for the HCLC in the Multiterminal Flexible DC Grid

An Optimized Fault-Ride-Through Control Strategy of Hybrid MMC with Fewer FBSMs