Abstract:The University of California, Berkeley (UCB) is performing thermal hydraulics safety analysis to develop the technical basis for design and licensing of fluoride-salt-cooled, high-temperature reactors (FHRs). FHR designs investigated by UCB use natural circulation for emergency, passive decay heat removal when normal decay heat removal systems fail. The FHR advanced natural circulation analysis (FANCY) code has been developed for assessment of passive decay heat removal capability and safety analysis of these innovative system designs. The FANCY code uses a one-dimensional, semi-implicit scheme to solve for pressure-linked mass, momentum and energy conservation equations. Graph theory is used to automatically generate a staggered mesh for complicated pipe network systems. Heat structure models have been implemented for three types of boundary conditions (Dirichlet, Neumann and Robin boundary conditions). Heat structures can be composed of several layers of different materials, and are used for simulation of heat structure temperature distribution and heat transfer rate. Control models are used to simulate sequences of events or trips of safety systems. A proportional-integral controller is also used to automatically make thermal hydraulic systems reach desired steady state conditions. A point kinetics model is used to model reactor kinetics behavior with temperature reactivity feedback. The underlying large sparse linear systems in these models are efficiently solved by using direct and iterative solvers provided by the SuperLU code on high performance machines. Input interfaces are designed to increase the flexibility of simulation for complicated thermal hydraulic systems. This paper mainly focuses on the methodology used to develop the FANCY code, and safety analysis of the Mark 1 pebble-bed FHR under development at UCB is performed.

High Flux Reactor Review and Reactivity Control Analysis

Conceptual design and safety characteristics of a new multi-mission high flux research reactor

A Review of the Performance Analysis of Plate Type Fuel Elements in High-Flux Reactors

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach

Thermal Hydraulics Analysis of the Fluoride-Salt-Cooled, High-Temperature Reactor

Research on the Induced Radioactivity of HTR-PM’s Reactor Pressure Vessel: A Comparative Study Between FLUKA, KORIGEN and QAD-CGA

Early Mitigation Measures for High Flux Reactor Loss-of-Coolant Accidents

Study on Reactivity Control Strategies for the Thermoelectric Integrated Space Nuclear Reactor

Design and Evaluation of Mitigation Measures for Tsinghua High Flux Reactor Loss-of-Coolant Accidents

Studies on Flibe Blanket Designs in Helical Reactor FFHR

Reactivity Accident Due to Control Rod Inadvertent Withdrawal of the 250mw High Temperature Gas-Cooled Reactor

Preliminary Investigation of THFR Passive Residual Heat Removal System

AN OVERVIEW STUDY ON NEUTRON FLUX AND SPECTRUM CHARACTERISTICS OF HIGH

Reactivity accident in a high temperature gas-cooled reactor due to inadvertent withdrawal of control rod

Core design and reactivity control optimization of small lead-cooled reactor LFR-180

Activation Calculation and Radiation Analysis for China Fusion Engineering Test Reactor

Activation Analysis of the Reactor Pressure Vessel of Htr-Pm Reactor Using Fluka Code

Development of the FHR Advanced Natural Circulation Analysis Code and Application to FHR Safety Analysis

Analysis of Reactivity Induced Accident for Control Rods Ejection with Loss of Cooling

Research on the Characteristics of a High-temperature Superconducting Leakage Flux-controlled Reactor

Discussion on Emergency Response Capability Configuration for Inherent Safe HTR