Abstract:The materials in the fusion system will be activated by the neutrons generated from D-T fusion reactions, causing the material with activity and decay heat at a variety level among the system. Predicting the amount of radwaste produced in the Chinese Fusion Engineering Testing Reactor (CFETR) and the time-evolution feature of the radwaste is of great importance to the minimization of waste and determine the management strategy. The purpose of this paper is to minimize the quality and quantity of the activated solid waste as low as reasonably achievable via source control, recycling and reuse, clearance, optimization of the management at the designing phase of CFETR. A detailed 3D model for CFETR is created to calculate the neutron spectra and fluxes of all non-void cells of the model. The inventory calculation for each cell with the given irradiation scenario and the cooling scheme was then carried out with FISPACT-II. The extensive calculation, data analysis, and post-processing are performed using a data processing code to calculate the component averaged activation responses and the waste classifications. The results suggest that the in-vessel materials exposed to high level neutron fluxes can hardly meet the clearance and low-level waste requirements, but they can be recycled with an advanced remote handling system shortly after shutdown or a conservative remote handling system after temporary storage within 100 years. The vacuum vessel, port plug, cryostat, and coils can be recycled with a conservative remote handling system with temporary storage. Especially, the port plug, cryostat, and central solenoid are clearable with temporary storage of 100 years. The influence of the operation time of in-vessel components on the radwaste severity and quantity is also evaluated. The severity of the radwaste increases when the operation time increases from 1000 to 3000 MWY, then decreasing with operation times longer than 3000 MWY. The detailed operation plan should be determined with comprehensive consideration of the important factors, including the influence on the radwaste severity. The allowed impurity level is also estimated, finding that the Uranium in the breeding zone and the SS316L used in divertor should be blamed for the intermediate-level waste production of blanket and divertor.

Activation Calculation and Radiation Analysis for China Fusion Engineering Test Reactor

Activation Analysis and Radwaste Assessment of CFETR

Activation and Environmental Aspects of In-Vacuum Vessel Components of CFETR

Activation Calculation and Analysis for CFETR Blanket

Preliminary Neutronics and Activation Analysis of the Water Cooled Solid Breeder Blanket for CFETR

Assessment of the Radioactivity Production in Water Coolant System of WCCB for CFETR

Neutronics calculation and activation analysis for CFETR magnet system

Activation Calculation and Environmental Safety Analysis for ITER Test Blanket Module

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

Investigation on the Tritium Self-Sufficiency and Neutron Shielding Based on a Water-Cooled Blanket for CFETR at 1.5 GW

Numerical Simulation of Tritium Behavior under a Postulated Accident Condition for CFETR TEP System

Particle-transport/depletion/activation/source-term Coupling Analysis for CFETR with NECP-MCX

Activation Analysis and Waste Management for the Dual Functional Lithium-Lead Test Blanket Module for ITER

Activation Calculation and Analysis for Chinese ITER Solid Test Blanket Module

Preliminary Safety Analysis of Tritium Source Term for the CFETR Tritium Plant

Activation Analysis of Coolant in a Water-Cooled Loop of China Fusion Engineering Test Reactor

Analysis of Radiation Conditions in the CFETR Ion Cyclotron Resonance Heating Antenna

Analysis of nuclear response in CFETR toroidal field coils with density reduction VR technique

Progress of the CFETR Design

Investigation and Analysis on Tritium Accumulation Phenomenon Based on a Water-Cooled Blanket for CFETR at 1.5 GW

Activation calculation analysis for China helium cooled ceramic breeder test blanket system