Abstract:In the design of fusion reactors, determining radiation levels due to neutrons and photons (gammas) throughout the reactor and its surroundings is important. Radiation transport codes need to have accurate cross-section libraries in order to produce accurate results. The Fusion Evaluated Nuclear Data Library (FENDL) is an international effort coordinated by the International Atomic Energy Agency, Nuclear Data Section, that assembles a collection of the best nuclear data for fusion applications. In the current FENDL-3.1d data library, neutron cross sections for 65 of the 180 isotopes present in the library come from ENDF/B-VII.1.Monte Carlo–based neutronics calculations using cross-section libraries from FENDL (versions 2.1 and 3.1d), ENDF/B (versions VII.1 and VIII.0), and candidate new evaluations for key structural elements/isotopes such as iron and chromium were performed. The calculations were performed in reactor-relevant models including a one-dimensional (1-D) cylindrical model of ITER, a three-dimensional (3-D) computer-aided design (CAD)–based model of ITER, and a 3-D CAD-based model of the U.S. Fusion Energy System Studies Fusion Nuclear Science Facility (FNSF).The results show that neutron fluxes calculated with different cross-section libraries can be as much as 12% higher and as much as 8% lower than those calculated with the reference cross-section library (FENDL-2.1). Nuclear heating calculated with different cross-section libraries can be as much as 14% higher and as much as 8% lower than those calculated with the reference cross-section library. Iron displacements per atom calculated with different cross-section libraries can be as much as 9% higher and as much as 9% lower than those calculated with the reference cross-section library. Helium production calculated with different cross-section libraries can be as much as 19% higher and as much as 2% lower than those calculated with the reference cross-section library. Tritium production in the ITER 1-D model's nonbreeding regions calculated with different cross-section libraries can be as much as 246% higher and as much as 5% lower than those calculated with the reference cross-section library. The tritium breeding ratio in the FNSF 3-D model calculated with different cross-section libraries averaged 1% higher at the inboard and 1.4% higher at the outboard than those calculated with the reference cross-section library.

Activation analysis of structural materials irradiated by fusion and fission neutrons

A Preliminary Work on the Preparation for Neutron Irradiation of Advanced Fusion Materials Using Small Samples in China

Activation Analysis and Waste Management for the Dual Functional Lithium-Lead Test Blanket Module for ITER

Activation Calculation and Radiation Analysis for China Fusion Engineering Test Reactor

Scoping of material response under DEMO neutron irradiation: comparison with fission and influence of nuclear library selection

Consequences of Neutron Energy Spectrum on Radiation Damage, Gas Production, and Transmutations in Fusion Materials

Damage parameters of structural materials in fusion environment compared to fission reactor irradiation

Activation Analysis of the Reactor Pressure Vessel of Htr-Pm Reactor Using Fluka Code

Helium-Hydrogen Synergistic Effects in Structural Materials Under Fusion Neutron Irradiation

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Comparison analysis of 1D/2D/3D neutronics modeling for a fusion reactor

Structural materials for fusion and spallation sources

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

An integrated model for materials in a fusion power plant: transmutation, gas production, and helium embrittlement under neutron irradiation

Neutronic analysis of IFMIF-DONES test cell cooling system

The challenge of developing structural materials for fusion power systems

Study on the fusion reactor performance with different materials and nuclear waste actinides

Shielding Design and Analysis of Fusion–Fission Hybrid Energy Reactor Blanket

Finite element models for radiation effects in nuclear fusion applications

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

Neutronics Calculations to Support the Fusion Evaluated Nuclear Data Library (FENDL)