Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Design of High Voltage, High Power and High Frequency Transformer in Lcc Resonant Converter

Design of High Power Density LLC Resonant Converter with Extra Wide Input Range

Lcc Resonant Converter Operating under Discontinuous Resonant Current Mode in High Voltage, High Power and High Frequency Applications

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

1Mhz-1Kw LLC Resonant Converter with Integrated Magnetics

A novel PCB winding transformer with controllable leakage integration for a 6.6kW 500kHz high efficiency high density bi-directional on-board charger

Full-Bridge LLC Resonant Converter with Parallel-Series Transformer Connection and Voltage Doubler Rectifier

Design of Transformer Shielding Foil Structure for Minimizing Common-Mode Noise in LLC Resonant Converters

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

Zero Voltage Dual-LLC Resonant Soft Switching Converter for Super High Frequency Induction Heating Power Supplies

Unified Equivalent Steady-State Circuit Model and Comprehensive Design of the LCC Resonant Converter for HV Generation Architectures

Design of an Integrated Transformer with Parallel Windings for a 30-kW LLC Resonant Converter

Analysis and Design-Optimization of LCC Resonant Converter Operating under Wide Range Input and Output Voltage

A High-Frequency High-Efficiency Three-Level LCC Converter for High-Voltage Charging Applications

A Coupled-Inductor based LCC Resonant Converter with the Primary-Parallel-Secondary-Series Configuration to Achieve Output-Voltage Sharing for HV Generator Applications

Design and Implementation of a Planar Transformer With Fractional Turns for High Power Density LLC Resonant Converters

Application of parallel resonant converter operating in discontinuous current mode

A Parameter Design Strategy Based on Operation Mode Analysis Method for LCC Converter Used in High-Voltage DC Power Supply

Modelling and Optimisation of Planar Matrix Transformer for High Frequency Regulated LLC Converter