Abstract:The utilization and effectiveness of a custom-made, portable and low-cost structural health monitoring (SHM) system that implements the PZT-based electro-mechanical admittance (EMA) methodology for the detection and evaluation of the damage of flexural reinforced concrete (RC) beams is presented. Tests of large-scale beams under monotonic and cyclic reversal-imposed deformations have been carried out using an integrated wireless impedance/admittance monitoring system (WiAMS) that employs the voltage measurements of PZT transducers. Small-sized PZT patches that have been epoxy-bonded on the steel bars surface and on the external concrete face of the beams are utilized to diagnose damages caused by steel yielding and concrete cracking. Excitations and simultaneous measurements of the voltage signal responses of the PZT transducers have been carried out at different levels of the applied load during the tests using the developed SHM devices, which are remotely controlled by a terminal emulator. Each PZT output voltage versus frequency response is transferred wireless and in real-time. Statistical index values are calculated based on the signals of the PZT transducers to represent the differences between their baseline response at the healthy state of the beam and their response at each loading/damage level. Finite Element Modeling (FEM) simulation of the tested beams has also been performed to acquire numerical results concerning the internal cracks, the steel strains and the energy dissipation and instability parameters. FEM analyses are used to verify the experimental results and to support the visual observations for a more precise damage evaluation. Findings of this study indicate that the proposed SHM system with the implementation of two different PZT transducer settings can be effectively utilized for the assessment of structural damage caused by concrete cracking and steel yielding in flexural beams under monotonic and cyclic loading.

Crack detection in reinforced concrete beams under loading using deformed shape curvature method

INCORPORATING PRE-EXISTING CRACKS IN STRUCTURAL ASSESSMENT OF RC STRUCTURES

Automated Finite Element Modeling and Analysis of Cracked Reinforced Concrete Beams from Three Dimensional Point Cloud

Shear Tests of Reinforced Concrete Beams with the Influence of Initial Shear Cracks

Estimation of Load-Carrying Capacity of Cracked RC Beams Using 3D Digital Twin Model Integrated with Point Clouds and Images

Applying Bandgap Defect Modes to Crack Detection in Beams Using Periodic Concentrated Masses

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Numerical simulation of cracking of early-age concrete three-point beams

Detecting Multiple Damages in UHPFRC Beams through Modal Curvature Analysis

Multiple Crack Detection of Concrete Structures Using Impedance-based Structural Health Monitoring Techniques

Early Crack Detection of Reinforced Concrete Structure Using Embedded Sensors

Nondestructive Monitoring Techniques for Crack Detection and Localization in RC Elements

Analytical study on damage detection method using displacement influence lines of road bridge slab

Assessment of Existing Bridge’s Beam Bending Stiffness Using Crack Characteristics

Flexural Damage Diagnosis in Reinforced Concrete Beams Using a Wireless Admittance Monitoring System-Tests and Finite Element Analysis

Damage identification of reinforced concrete beams

To Monitor Fracture Behaviors in Four-Point Cyclic Bending Tests of Low-Activated High Alumina Concrete and Standard Concrete RC Beams Using Acoustic Emission Technique

A computer vision-based crack quantification of reinforced concrete shells using graph theory measures

Crack Detection in Beams by Wavelet Analysis of Transient Flexural Waves

Damage Detection in Steel Beams Using Generalized Flexibility Quotient Difference Based Damage Index and Artificial Neural Network

Crack detection and classification of repaired concrete beams by acoustic emission monitoring