Abstract:The fracture properties of concrete are affected by various factors, including material parameters and crack geometry parameters. In the paper, pure mode I fracture and mixed mode fracture of concrete bending beams under impact load were studied experimentally and numerically. Numerical models by applying extended finite element method based on the cohesive crack model were employed to simulate pure mode I fracture and mixed mode fracture of concrete bending beams, an experimental program was conducted to validate the numerical models. The effects of material parameters as well as crack geometry parameters on the fracture properties of concrete bending beams were discussed and the most sensitive parameter to affect the fracture properties of concrete bending beams was determined based on the numerical simulations. The results show that the simulation results match reasonably well with the experimental results. For pure mode I fracture, concrete strength grade is proved to have less influence on the fracture properties of concrete bending beams under relative high strength grade condition; Elastic modulus was determined to have the greatest impact on the fracture properties of concrete bending beams, followed by tensile stress, initial crack length and fracture energy; however, Poisson ratio have almost no effect on the fracture properties of concrete bending beams. For mixed mode fracture problem, the influences of initial notch position on crack propagation path can be expressed as a competition between mode I fracture and mixed mode fracture, with offset parameter increasing from 0.0 to 1.0, the fracture failure mode of concrete bending beams changes from pure mode I fracture to mixed mode fracture, followed by both mode I and mixed mode fractures, and finally translates to mode I fracture.

Numerical simulation of cracking of early-age concrete three-point beams

Numerical Simulation of Fracture and Damage Behaviour of Concrete at Different Ages

Numerical Analysis of Softening Relationship for Early-Age Concrete

Automated Finite Element Modeling and Analysis of Cracked Reinforced Concrete Beams from Three Dimensional Point Cloud

EXTEND FINITE ELEMENT NUMERICAL SIMULATION FOR CRACK PROPAGATION OF FIBER CONCRETE

Cohesive Cracking Simulation of Concrete Using Effective Modulus

Developing a Three-Dimensional Finite Element Analysis Approach to Simulate Corrosion-Induced Concrete Cracking in Reinforced Concrete Beams

Influence of Mineral Admixture on Early-Age Concrete Cracking

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Fracture Property of Steel Fiber Reinforced Concrete at Early Age

Dynamic Fracture Catastrophe Model of Concrete Beam under Static Load

NUMERICAL SIMULATION OF FAILURE PROCESS OF THREE-POINT BENDING CONCRETE BEAM CONSIDERING HETEROGENEITY OF TENSILE STRENGTH AND POST-PEAK SOFTENING CURVE

New concrete cracking model established based on fracture mechanics and damage theory

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

Mechanical properties and numerical simulation of crack interface in reinforced concrete

Three-dimensional Nonlinear Numerical Model for Concrete Fracture Analysis

Early Age Properties and Cracking Control of Concrete

Parametric analysis of dynamic crack propagation of concrete bending beam based on the extended finite element method

Mesoscale fracture analysis of three-point bending concrete beams based on cohesive zone model

Experimental study on fracture properties of self-compacting concrete