Abstract:Abstract Substantial research effort has been devoted on linking corrosion-induced cracking of concrete with the internal corrosion damage level. Still, numerical models of the corrosion and cracking process require internal parameters, that cannot be directly evaluated from experimental data. Therefore, this study provides a novel experimental method for monitoring the effects of steel corrosion adjacent to the steel-concrete interface. This non-destructive method is suited for small-scale laboratory-made specimen, and was designed to provide missing information required for subsequent calibration of numerical models. Hollow steel bars were cast into concrete and subjected to accelerated corrosion using the impressed current technique. The deformations of the hollow steel bars were measured using distributed strain sensing in an optical fibre, attached to the inner surface of the hollow steel bars. After the corrosion period, X-ray Computed Tomography scans were performed to evaluate concrete cracking and corrosion level. The results reveal a non-uniform distribution of strain around the perimeter of the steel, indicating a non-uniform radial stress distribution. The non-uniformity correlated very well with the position of the corrosion-induced cracks; with extension hoop strains in the steel at the location of these cracks and contraction hoop strains in between. Further, the corrosion level varied around the perimeter, with higher values near cracks. The combination of non-destructive monitoring techniques used in this study on small-scale laboratory-made specimens show great potential to reveal new insights on how the corrosion pattern, corrosion-induced cracking of the concrete cover and stress (indirectly measured through the strain in the steel) interact throughout the corrosion process.

Monitoring corrosion-induced concrete cracking adjacent to the steel-concrete interface

State-of-art of corrosion-induced cracking of reinforced concrete structures

Prediction of Corrosion-Induced Concrete Cracking under External Loading and Stirrup Constraint

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Towards an Automated Crack Monitoring using Distributed Fiber Optic Sensors

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Modeling the Amount of Steel Corrosion at the Cracking of Concrete Cover

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

Study On Distribution Of Steel Corrosion Products In Concrete Structures

A Monitoring Method Based On Fbg For Concrete Corrosion Cracking

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Unravelling the interplay between steel rebar corrosion rate and corrosion-induced cracking of reinforced concrete

Corrosion Damages of Reinforced Concrete Characterized by X-ray CT and DVC Techniques

Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete

An Optical Fiber Sensor Method for Simultaneously Monitoring Corrosion and Structural Strain Induced by Loading

Fractal Characterization of Non-Uniform Corrosion of Steel Bars in Concrete Beams after Accelerated Depassivation and Seven-Year Natural Corrosion.

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

Study on Experimental Method and Morphology of Accelerated Non-Uniform Corrosion of Steel Bars

On the Penetration of Corrosion Products from Reinforcing Steel into Concrete Due to Chloride-Induced Corrosion