Abstract:Thermal treatment is an efficient method to recycle spent lithium-ion batteries and the thermal treatment products are rich in valuable metals with catalytic activity such as Co and Ni. Therefore, the feasibility of using the thermal treatment products (PyNCM and PyLCO) of spent ternary lithium batteries (NCM) and lithium cobalt oxide batteries (LCO) as the cheap catalysts for biomass (wheat straw) pyrolysis was explored in this study. The catalytic effect of the typical components of PyNCM and PyLCO (Ni, Co, NiO and CoO) on the biomass pyrolysis process was also investigated for comparison purposes. The results showed that PyNCM and PyLCO could promote the devolatilization process of wheat straw. The Second order model could well describe the catalytic pyrolysis process of wheat straw based on the Coats-Redfern method, and the obtained activation energy was in the range of 79.00 kJ/mol to 83.90 kJ/mol. The PyNCM and PyLCO had good catalytic activity for enhancing the cracking of bio-oil to produce more gaseous products (syngas), especially for PyNCM, whose gas yield increased significantly from 15.70% to 22.26%. As for bio-oil compositions, the PyNCM and PyLCO both promoted the formation of hydrocarbon compounds and reduce the oxygen content of the obtained bio-oils. The increase of the hydrocarbon content was mainly attributed to the NiO and CoO components in PyNCM and PyLCO. In addition, both PyNCM and PyLCO increased the content and yield of H 2 in the syngas. Especially for PyNCM, the content and yield of H 2 increased 1.6 times and 5.5 times respectively compared with direct pyrolysis of wheat straw without catalyst. The mechanism of biomass catalytic pyrolysis in the presence of PyLCO and PyNCM was proposed and discussed. The catalytic effect of PyNCM on wheat straw pyrolysis was more distinct than that of PyLCO, which might be attributed to the positive synergistic effect of Ni and Co compounds in PyNCM. This study demonstrated that the thermal treatment products of spent lithium-ion batteries could be used as efficient catalysts for biomass pyrolysis products upgrading.

Balancing the Components of Biomass and the Reactivity of Pyrolysis Gas: Biomass-Assisted Recycling of Spent LiCoO 2 Batteries

Recovery of valuable metals from spent lithium-ion batteries through biomass pyrolysis gas-induced reduction

Revealing the delithiation process of spent LiMn2O4 and LiNi0.6Co0.2Mn0.2O2 batteries during the biomass-assisted gasthermal and carbothermal reduction

Efficient recovery of valuable metals from cathode materials of spent LiCoO2 batteries via co-pyrolysis with cheap carbonaceous materials

Spent lithium-ion battery materials recycling for catalytic pyrolysis or gasification of biomass

Pyrolysis kinetics and reaction mechanism of the electrode materials during the spent LiCoO2 batteries recovery process

Microthermal catalytic aerogenesis of renewable biomass waste using cathode materials from spent lithium-ion batteries towards reversed regulated conversion and recycling of valuable metals

Organics removal combined with in situ thermal-reduction for enhancing the liberation and metallurgy efficiency of LiCoO2 derived from spent lithium-ion batteries

Study on Pyrolysis Pretreatment Characteristics of Spent Lithium-Ion Batteries

In-situ enhanced catalytic reforming behavior of cobalt-based materials with inherent zero-valent aluminum in spent lithium ion batteries

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Reductive Roasting of Cathode Powder of Spent Ternary Lithium-Ion Battery by Pyrolysis of Invasive Plant Crofton Weed

Catalytic pyrolysis of biomass with thermal treatment products of spent lithium-ion batteries for the upgrading of bio-oil and syngas

Green and Energy-Saving Recycling of LiCoO 2 by Synergetic Pyrolysis with Polyvinyl Chloride Plastics

An innovative strategy for spent LiCoO 2 battery recycling based on chemical looping complementary reduction

Crystal phase and nanoscale size regulation utilizing the in-situ catalytic pyrolysis of bamboo sawdust in the recycling of spent lithium batteries

Recovery of Electrode Materials from a Spent Lithium-Ion Battery through a Pyrolysis-Coupled Mechanical Milling Method

Reduction mechanism of bamboo powder pyrolysis in selective lithium extraction from spent lithium-ion batteries

Pyrolysis and physical separation for the recovery of spent LiFePO4 batteries

Waste plastics upcycled for high-efficiency H2O2 production and lithium recovery via Ni-Co/carbon nanotubes composites

Recovery of degraded LiCoO2 through a CO2 -assisted low-temperature thermal reduction approach