Abstract:The traditional acid leaching method for recycling valuable metals from the cathode material of spent lithium-ion batteries (LIBs) has encountered the problems of high consumption of H2SO4 and reducing agents. In this study, a novel process has been developed to strengthen valuable metal recovery from spent lithium-ion batteries by reductive thermal treatment and electrochemical leaching. With the help of reductive thermal treatment under the conditions of R = 1600 °C and 120 min, the layered structure of the cathode material LiNi1/3Co1/3Mn1/3O2 is reduced to a mixture of Li2CO3, NiO, Co3O4, Mn2O3, and MnO2 due to the oxygen releasing from the framework. The destruction of the layered crystal structure reduces the difficulty of leaching valuable metals. 90.59% Ni, 90.53% Co, 66.40% Mn, and 100% Li were leached under the optimal conditions of 20 mL/g liquid–solid ratio, 1.5 M H2SO4, 0.8 A, and 150 min at room temperature. Comparing the processes of reductive thermal treatment with acid leaching and direct electrochemical leaching of spent cathode material under the same leaching conditions, the proposed approach can achieve the highest metal recovery and economic benefits. It can be implemented at room temperature, decreases the application of reducing agent and sulfuric acid, and makes full use of spent graphite, resulting in a greener recycling process for recovering valuable metals from spent LIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c00937?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c00937</a>.XRD pattern of spent cathode materials, the picture of roasted product under conditions of R = 1, at 600 °C for 180 min, XPS of Ni, Co, and Mn for the electrochemical residues under conditions of 1.5 M H2SO4, 0.8 A for 150 min, the composition of spent cathode materials, calculation of the cost, benefit, and profit, and comparison of leaching valuable metals by proposed and existing methods (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00937/suppl_file/sc1c00937_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Crystal phase and nanoscale size regulation utilizing the in-situ catalytic pyrolysis of bamboo sawdust in the recycling of spent lithium batteries

Microthermal catalytic aerogenesis of renewable biomass waste using cathode materials from spent lithium-ion batteries towards reversed regulated conversion and recycling of valuable metals

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

Reduction mechanism of bamboo powder pyrolysis in selective lithium extraction from spent lithium-ion batteries

Stepwise recovery of critical metals from spent NCM lithium-ion battery via calcium hydroxide assisted pyrolysis and leaching

Recovery of valuable metals from spent lithium-ion batteries through biomass pyrolysis gas-induced reduction

Enhanced Leaching of Metals from Spent Lithium-Ion Batteries by Catalytic Carbothermic Reduction

Spray pyrolysis technology-based closed-loop for regenerating single-crystal cathodes from spent lithium-ion batteries

Pollutant-free Pyrolysis Strategy for Direct Upgrading of Cathode Materials from Spent Lithium-Ion Batteries

Converting spent lithium cobalt oxide battery cathode materials into high-value products via a mechanochemical extraction and thermal reduction route

Clean Universal Solid-State Recovery Method of Waste Lithium-Ion Battery Ternary Positive Materials and Their Electrochemical Properties

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Revealing the delithiation process of spent LiMn2O4 and LiNi0.6Co0.2Mn0.2O2 batteries during the biomass-assisted gasthermal and carbothermal reduction

An enhanced strategy based on the pyrolysis of bean dregs for efficient selective recovery of lithium from spent lithium-ion batteries

A high-efficiency and low-carbon strategy for selective lithium recovery from spent lithium-ion batteries: Combining mechanochemical activation with biomass reduction roasting

Towards integration of pyro- and hydrometallurgical unit operations for efficient recovery of battery metals from waste lithium-ion batteries

Closed-loop recycling of spent lithium-ion batteries based on selective sulfidation: An unconventional approach

Cleaner recycling of cathode material by in-situ thermite reduction

Priority recovery of lithium and effective leaching of nickel and cobalt from spent lithium-ion battery

Strengthening Valuable Metal Recovery from Spent Lithium-Ion Batteries by Environmentally Friendly Reductive Thermal Treatment and Electrochemical Leaching

Catalytic pyrolysis of cellulose with biochar modified by Ni-Co-Mn cathode material recovered from spent lithium-ion battery