Abstract:LiCoO2 (LCO) lithium-ion battery (LIB) is rich in valuable metals (cobalt and lithium), which has high recycling value. The existing process has basically realized the extraction of cobalt, but there are still shortcomings in harmless disposal of fluorine-containing electrolyte, binder and other organic matters, selective extraction of lithium and low-cost extraction of cobalt. In this context, a novel process was developed to realize the full-component recovery of spent LiCoO2 battery via environmentally friendly pyrolysis and hydrometallurgical leaching. The organic matters were recovered in the form of pyrolytic oil and gas, in which the harmful fluorine element was absorbed by Ca(OH)2 solution. The current collectors (copper and aluminum) were recovered after the easy separation of electrode materials due to the degradation of binders. During pyrolysis the cathode material was deconstructed and reduced under the synergistic effect of pyrolytic gas and anode graphite. Selective recovery of lithium and cobalt was achieved through carbonated water leaching and reductant-free acid leaching. The leaching efficiencies of lithium and cobalt were respectively 87.9% and 99.1% under the optimal conditions. Lithium carbonate and cobalt sulfate were obtained by evaporative crystallization, respectively. The remaining residue was only graphite without impurity entrainment. The results in this research suggest that the process consisting of pyrolysis and hydrometallurgical leaching is inexpensive, efficient, and eco-friendly for full-component recycling of spent LiCoO2 battery.

Stepwise recovery of critical metals from spent NCM lithium-ion battery via calcium hydroxide assisted pyrolysis and leaching

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation

Enhanced Leaching of Metals from Spent Lithium-Ion Batteries by Catalytic Carbothermic Reduction

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

New strategy of electrochemical precipitation to metals separation in spent NCM cathode materials for direct regeneration

Recycling for Recovery of Critical Metals from LiCoO2 Cathode Material Through Methanesulfonic Acid-Citric Acid Organic Leaching System

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Recovery of valuable metals from spent lithium-ion batteries via zinc powder reduction roasting and cysteine leaching

Selective Recovery of Valuable Metals from Spent Lithium-Ion Batteries – Process Development and Kinetics Evaluation

Efficient extraction of valuable metals from spent LiNi0.5Co0.2Mn0.3O2 cathode based on an acid-free leaching process

Leaching Process for the Recovery of Valuable Metals from Spent Lithium-nickel-cobalt-manganese-oxide-based Lithium-ion Batteries

Leaching of valuable metals from cathode active materials in spent lithium-ion batteries by levulinic acid and biological approaches

Priority recovery of lithium and effective leaching of nickel and cobalt from spent lithium-ion battery

Study on the reduction roasting of spent LiNixCoyMnzO2 lithium-ion battery cathode materials

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate

Feasible route for the regeneration of cathode materials from spent lithium-ion batteries via reduction leaching and in-site precipitation

Improved Recovery of Cathode Materials and Enhanced Lithium Selective Extraction from Spent LiNi0.5Co0.2Mn0.3O2 Batteries Via CaCl2-assisted Microwave Roasting

A clean and efficient process for simultaneous extraction of Li, Co, Ni and Mn from spent Lithium-ion batteries by low-temperature NH4Cl roasting and water leaching

Closed-loop recycling of spent lithium-ion batteries based on selective sulfidation: An unconventional approach

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

One-step selective separation and efficient recovery of valuable metals from mixed spent lithium batteries in the phosphoric acid system