Abstract:A green, simple, and scalable upcycling strategy is shown that not only effectively regenerates degraded NCM material (LiNi0.6Co0.2Mn0.2O2 as a model system) but also decorates the material with a uniform Li4Ti5O12 coating. Lithium‐ion batteries (LIBs) with ternary oxide cathode materials are the prevalent energy storage devices for electric vehicles, and the huge amounts of spent LIBs pose severe challenges in terms of environmental impact and resource management. Particularly, the proper handling of degraded cathode materials is of central importance for the sustainable and closed‐loop development of LIBs industry. In this context, direct regeneration of degraded ternary oxides toward reusable high‐performance cathode materials is environmentally and economically favorable in contrast to present metallurgical recycling methods. In this work, a simple and effective two‐step method is demonstrated to regenerate the degraded NCM 622 (LiNi0.6Co0.2Mn0.2O2) materials by elemental compensation and structural restoration. Moreover, a multi‐functional LTO (Li4Ti5O12) surface coating is simultaneously designed to guarantee rapid Li+ diffusion and stable surface of the regenerated product. Therefore, the regenerated LTO‐coated NCM materials show excellent electrochemical performance; specifically, the initial discharge capacity (183.0 mAh g−1 at 0.1 C), rate capability (90.0 mAh g−1 at 10 C), and cycling stability (79.3% capacity retention after 200 cycles) are even comparable with those of fresh materials. The as‐established upcycling strategy may shed light on the value‐added recycling of degraded cathode materials and thereby a virtuous cycle of LIBs.

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate

Urea Solvothermal Regeneration of Spent LiNi0.5Co0.2Mn0.3O2: Performance and Environmental Benefits

A green, efficient, closed-loop direct regeneration technology for reconstructing of the LiNi0.5Co0.2Mn0.3O2 cathode material from spent lithium-ion batteries

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Recycling and reutilization of LiNi0.6Co0.2Mn0.2O2 cathode materials from spent lithium-ion battery

New strategy of electrochemical precipitation to metals separation in spent NCM cathode materials for direct regeneration

Feasible route for the regeneration of cathode materials from spent lithium-ion batteries via reduction leaching and in-site precipitation

A mild and efficient closed-loop recycling strategy for spent lithium-ion battery

A Ternary Molten Salt Approach for Direct Regeneration of LiNi0.5 Co0.2 Mn0.3 O2 Cathode.

Sustainable Regeneration of Spent Layered Lithium Nickel Cobalt Manganese Oxide Cathode from Scrapped Lithium-ion Battery

Effective Upcycling of Degraded NCM Cathode Materials Assisted by Surface Engineering for High‐Performance Lithium‐Ion Batteries

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

A Ternary Molten Salt Approach for Direct Regeneration of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode

The regeneration and electrochemical performance study of NCM622 cathode materials

Rejuvenating LiNi0.5Co0.2Mn0.3O2 cathode directly from battery scraps

Rapid extraction of valuable metals from spent LiNixCoyMn1-x-yO2 cathodes based on synergistic effects between organic acids

Upcycling of Spent LiNi 0.33 Co 0.33 Mn 0.33 O 2 to Single-Crystal Ni-Rich Cathodes Using Lean Precursors

Direct recycling of spent nickel-rich cathodes in reciprocal ternary molten salts

Closed-loop recycling of spent lithium-ion batteries based on selective sulfidation: An unconventional approach

Mechanochemical upcycling of spent LiCoO2 to new LiNi0.80Co0.15Al0.05O2 battery: An atom economy strategy

Efficient extraction of valuable metals from spent LiNi0.5Co0.2Mn0.3O2 cathode based on an acid-free leaching process