Abstract:The demand for lithium-ion batteries (LIBs) has surged in recent years, driven by the rapid growth of electric vehicles (EVs) and emerging energy storage technologies. Yet, this surge in demand has also resulted from a significant increase in the number of spent batteries. Given the potential for environment pollution wastage, it is absolutely crucial to prioritize the recovery and recycling of these used lithium-ion batteries. The common techniques employed in large-scale industrial settings for battery recycling are pyrometallurgy and hydrometallurgy. These are pivotal multi-step processes, particularly suitable for materials containing Cobalt (Co) and Nickel (Ni), such as NMC (LiNi x Mn y Co z O 2 ). Aside from NMC, there has been a surge in the adoption of LFP (LiFePO 4 ) as a cathode material target for lithium-ion batteries in electric vehicles worldwide over the past few decades. However, these established industrial recycling methods are not applicable to LFP due to the comparatively lower value of iron. This necessitates the pursuit of direct recycling approaches. In order to accomplish this goal, direct recycling stands out as the most suitable technique for regenerating spent batteries 1 . Unlike processes involving solution-based or high-temperature steps that entail potentially wasteful steps, this approach aims to reduce energy consumption and costs, all while maintaining environmental integrity through a judicious utilization of resources, materials, and energy. Consequently, our attention is directed towards this specific LFP material, prompting us to detail a direct recycling procedure for spent LFP cathodes via a chemical lithiation process at room temperature in a solution containing lithium iodide (LiI) and various solvents 2 (Fig. 1). References: (1) Y. Jin, T. Zhang, M. Zhang, Advances in intelligent regeneration of cathode materials for sustainable lithium-ion batteries, Adv. Energy Mater. 12 (2022), 2201526. (2) Ouaneche, T. et al. Room temperature efficient regeneration of spent LiFePO 4 by direct chemical lithiation. 579 , J. Power Sources (2023) 233248. Figure 1

Direct recycling of spent nickel-rich cathodes in reciprocal ternary molten salts

Flux upcycling of spent NMC 111 to nickel-rich NMC cathodes in reciprocal ternary molten salts

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Direct Recycling of End-of-Life Lithium-Ion Battery Cathode Materials through Redox Mediator Chemistry

Recycling and Direct-Regeneration of Cathode Materials from Spent Ternary Lithium-Ion Batteries by Hydrometallurgy: Status Quo and Recent Developments : Economic recovery methods for lithium nickel cobalt manganese oxide cathode materials

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate

Scalable Direct Recycling of Cathode Black Mass from Spent Lithium‐Ion Batteries

Closed-Loop Direct Upcycling of Spent Ni-Rich Layered Cathodes into High-Voltage Cathode Materials

Achieving low-temperature hydrothermal relithiation by redox mediation for direct recycling of spent lithium-ion battery cathodes

Reclaimed and Up-Cycled Cathodes for Lithium-Ion Batteries

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

Feasible route for the regeneration of cathode materials from spent lithium-ion batteries via reduction leaching and in-site precipitation

Sustainable Regeneration of Spent Layered Lithium Nickel Cobalt Manganese Oxide Cathode from Scrapped Lithium-ion Battery

Direct Regeneration of Spent Li-Ion Battery Cathodes via Chemical Relithiation Reaction

A Ternary Molten Salt Approach for Direct Regeneration of LiNi0.5 Co0.2 Mn0.3 O2 Cathode.

A Ternary Molten Salt Approach for Direct Regeneration of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode

Efficient Recovery of Value Metals from Spent Lithium-Ion Batteries by Combining Deep Eutectic Solvents and Coextraction

Efficient Direct Recycling of Spent Cathode Materials in Lithium-Ion Batteries

Redox Mediator Relithiation of End-of-Life Lithium-Ion Battery Cathode Materials

Sustainable Recycling of Electrode Materials in Spent Li-Ion Batteries through Direct Regeneration Processes

Direct recycling technologies of cathode in spent lithium-ion batteries