Abstract:Demand for lithium-ion batteries (LIBs) has increased dramatically over the years due to the rapid market expansion of electric vehicles. However, many of the essential components of cathode materials, such as cobalt, nickel, manganese and lithium, are resource-limited and expensive[1]. Therefore, recycling of used LIB cathode materials is very important to conserve resources and the environment. Currently, the lithium secondary battery recycling technology mainly uses wet and dry smelting, but there is a disadvantage of high energy consumption due to the use of strong acid and the smelting process[2-3]. In this study, the cathode active material was separated from a pouch-type lithium secondary battery separated from a portable tablet that was over 10 years old and the chemical, structural, and electrochemical characteristics thereof were investigated. The cathode active materials were dismantled from a pouch-type LIB, which was removed from the tablet produced in 2011. The pouch cell was in a swelling state and the OCV was 0V due to internal short is expected. As a result of TGA analysis, the electrode composition was confirmed to be 92wt% of the cathode active material, 3wt% of the conductive agent, and 3wt% of the binder, respectively. The recovery rate of the active material is the best when a mixed solvent including NMP, heating, and ultrasonic, respectively. Through SEM and EDS analysis, copper metal due to dissolution of the negative electrode current collector was found on the surface of the positive electrode. As shown in Fig. 1, It can be seen that the positive electrode active material recovered using the composite solvent is a positive electrode active material that is a mixture of NCM active material and LMO active material. The XRD results shows a well layered structure and a Co 3 O 4 phase due to lithium deficiency. In order to examine the electrochemical characteristics of the recovered electrode, it was reassembled into a 2032 coin type cell and evaluated, and the discharge capacity of approximately 150mAh/g was recovered as shown in Fig. 2. The positive active material recovered according to the experimental results is estimated to be in a state of insufficient lithium, and a lithium compensation process is planned to be additionally performed in the future.

Redox Mediator Relithiation of End-of-Life Lithium-Ion Battery Cathode Materials

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Direct Recycling of End-of-Life Lithium-Ion Battery Cathode Materials through Redox Mediator Chemistry

Direct Recycling of End-of-Life Li-Ion Cathode Materials through Redox Chemistry Mediators

An Effective Relithiation Process for Recycling Lithium‐Ion Battery Cathode Materials

A Redox Targeting-Based Material Recycling Strategy for Spent Lithium Ion Batteries

Direct recycling of spent nickel-rich cathodes in reciprocal ternary molten salts

Recycling of Lithium-Ion Battery Materials Using Deep Eutectic Solvents

Direct Regeneration of Spent Li-Ion Battery Cathodes via Chemical Relithiation Reaction

Achieving low-temperature hydrothermal relithiation by redox mediation for direct recycling of spent lithium-ion battery cathodes

Scalable Direct Recycling of Cathode Black Mass from Spent Lithium‐Ion Batteries

Reclaimed and Up-Cycled Cathodes for Lithium-Ion Batteries

A holistic review on the direct recycling of lithium-ion batteries from electrolytes to electrodes

Efficient Direct Recycling of Spent Cathode Materials in Lithium-Ion Batteries

Li-Ion Battery Cathode Recycling: An Emerging Response to Growing Metal Demand and Accumulating Battery Waste

Research for Electrochemical & Structural Properties of Recycling Cathode Materials for End of Life Lib

Redox-Mediated Recycling of Spent Lithium-Ion Batteries Coupled with Low-Energy Consumption Hydrogen Production

Repair and Reuse of Spent Lithium Battery Electrode Materials

Sustainable Recycling of Electrode Materials in Spent Li-Ion Batteries through Direct Regeneration Processes

Direct lithium extraction from spent batteries for efficient lithium recycling

Thermodynamically controlled chemical regeneration of spent battery cathodes using recyclable electron donors under ambient conditions