Abstract:The regeneration and utilization of metallic elements in waste lithium-ion batteries (LIBs) have caused growing notice from researchers and battery manufacturers because of the increasing amount of waste LIBs and limited lithium resources. In this work, we propose a novel valuable metal leaching system in waste positive materials of LIBs via a recyclable clean solid-state conversion method, which was simple and easy to realize a high utilization rate of waste resources. In this leaching system, approximately neutral ammonium sulfate solid was used as the bifunctional leaching agent based on reduction and acidification in the leaching procedure of ternary positive materials (NCMs). The roasting process of (NH4)2SO4 and NCMs was followed by the main metallic elements in NCMs being transformed into soluble sulfates, which could be completely leached in the water leaching procedure. The roasting–leaching process parameters were systematically investigated on the molar ratio, roasting temperature, and time. Under optimal conditions, all the leaching rates of Ni, Co, Mn, and Li achieved 99%. After generating sulfate solution by water leaching, the spherical ternary material precursor was co-precipitated with a (NH4)2CO3 precipitant, and the formed (NH4)2SO4 was recycled for the next batch, thus achieving a green and low cost recyclable route. The re-synthesized LiNi1/3Co1/3Mn1/3O2 (NCM111) with homogeneous size particle distribution and good layered hexagonal structure of α-NaFeO2 was obtained as a cathode material after high-temperature calcination with uniform particle size distribution and intact layered structure with a hexagonal crystal system of α-NaFeO2, which well meets the commercial requirements for LIBs in terms of electrochemical properties.

Urea Solvothermal Regeneration of Spent LiNi0.5Co0.2Mn0.3O2: Performance and Environmental Benefits

Multiscale Observations on Mechanisms for Direct Regeneration of Degraded NCM Cathode Materials

A green, efficient, closed-loop direct regeneration technology for reconstructing of the LiNi0.5Co0.2Mn0.3O2 cathode material from spent lithium-ion batteries

Effective Upcycling of Degraded NCM Cathode Materials Assisted by Surface Engineering for High‐Performance Lithium‐Ion Batteries

Novel Recycling Approach to Regenerate a LiNi0.6Co0.2Mn0.2O2 Cathode Material from Spent Lithium-Ion Batteries

A Ternary Molten Salt Approach for Direct Regeneration of LiNi0.5 Co0.2 Mn0.3 O2 Cathode.

A Ternary Molten Salt Approach for Direct Regeneration of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Self‐Reconstruction of Highly Degraded LiNi0.8Co0.1Mn0.1O2 Towards Stable Single‐Crystalline Cathode

Recycling and reutilization of LiNi0.6Co0.2Mn0.2O2 cathode materials from spent lithium-ion battery

Recycling and Reutilization of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Materials from Spent Lithium-Ion Battery

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

Closed-loop recycling of spent lithium-ion batteries based on selective sulfidation: An unconventional approach

Recent progress on sustainable recycling of spent lithium-ion battery: Efficient and closed-loop regeneration strategies for high-capacity layered NCM cathode materials

Clean Universal Solid-State Recovery Method of Waste Lithium-Ion Battery Ternary Positive Materials and Their Electrochemical Properties

Rejuvenating LiNi0.5Co0.2Mn0.3O2 cathode directly from battery scraps

Feasible Regeneration of Cathode Material from Spent Portable Electronics Batteries Via Nano-Bubbles Enhanced Leaching

New strategy of electrochemical precipitation to metals separation in spent NCM cathode materials for direct regeneration

High reversibility of layered oxide cathode enabled by direct Re-generation

Separation and Regeneration of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Materials from Spent Lithium-Ion Batteries: A Facile Process