Abstract:During the reduction roasting of waste ternary Li-ion batteries (LIBs), a large amount of carbon reductant is introduced in the recycling process, which is not conductive to achieve the goal of carbon peaking and carbon neutrality. This research proposes to make full use of aluminum and carbon – main constituents of waste LIBs – as reductants in the roasting process. Results show that the aluminum-carbon reduction roasting method has a higher efficiency compared with the traditional carbon reduction. Lithium present in ternary materials can be almost completely transformed into soluble Li 2 CO 3 , while the associated Ni, Co and Mn are all converted into insoluble metal elements or their corresponding oxides at 650 °C (t = 90 min). The presence of Al decreases the carbothermal roasting temperature, while the presence of waste carbon allows Li to be converted into easily soluble lithium carbonate in preference to lithium aluminate. The optimal amount of carbon and Al in the spent LIBs were 14.7% and 7.0%, respectively. After roasting, > 97% of Li could be selectively leached by carbonated water leaching, while only 99% Al separation. These results suggest that the in-situ aluminum-carbon reduction roasting, followed by selective leaching of Li and Al, mitigates several of the challenges related to battery recycling: (i) Li extraction is increased substantially above the state-of-the-art recovery efficiencies, (ii) Al - known to decrease battery metals extraction in hydrometallurgical processing - is selectively removed after making full use of its reducibility and (iii) battery metal-rich residues with low impurity levels is produced for further refining, therefore paving the way towards more economical, efficient and environmentally friendly spent LIBs recycling.

A high-efficiency and low-carbon strategy for selective lithium recovery from spent lithium-ion batteries: Combining mechanochemical activation with biomass reduction roasting

An enhanced strategy based on the pyrolysis of bean dregs for efficient selective recovery of lithium from spent lithium-ion batteries

Recycling of valuable metals from spent lithium-ion batteries by self-supplied reductant roasting

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Preferential and efficient extraction of lithium under the combined action of reduction of herb-medicine residue and leaching of oxalic acid

Thermodynamic and experimental analysis of lithium selectively recovery from spent lithium-ion batteries by in-situ carbothermal reduction

Recovery of valuable metals from spent lithium-ion batteries through biomass pyrolysis gas-induced reduction

Preferentially selective extraction of lithium from spent LiCoO2 cathodes by medium-temperature carbon reduction roasting

Leaching Li from Mixed Cathode Materials of Spent Lithium-ion Batteries by Carbon Thermal Reduction

Preferentially selective recovery of lithium from spent LiCoO2 by sulfation roasting of MnSO4

Extraction of valuable metals from spent cathode materials by reductive roasting in methane atmosphere

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

Selective lithium extraction of cathode materials from spent lithium-ion batteries via low-valent salt assisted roasting

Improved Recovery of Cathode Materials and Enhanced Lithium Selective Extraction from Spent LiNi0.5Co0.2Mn0.3O2 Batteries Via CaCl2-assisted Microwave Roasting

Improved recovery of lithium from spent lithium-ion batteries by reduction roasting and NaHCO3 leaching

Magnetization roasting combined with multi-stage extraction for selective recovery of lithium from spent lithium-ion batteries

Microthermal catalytic aerogenesis of renewable biomass waste using cathode materials from spent lithium-ion batteries towards reversed regulated conversion and recycling of valuable metals

Reduction mechanism of bamboo powder pyrolysis in selective lithium extraction from spent lithium-ion batteries

Selective Lithium Leaching from Spent Lithium-Ion Batteries Via a Combination of Reduction Roasting and Mechanochemical Activation

Separation of Li and Al from spent ternary Li-ion batteries by in-situ aluminum‐carbon reduction roasting followed by selective leaching

Selective recycling of lithium from spent LiNixCoyMn1-x-yO2 cathode via constructing a synergistic leaching environment