Abstract:The combined hydrometallurgical and pyrometallurgical process is an innovative method for recycling spent batteries. This process includes a carbothermic reduction step that reduces the valence of valuable metals in the batteries, facilitating subsequent leaching, which is a crucial stage in the recycling process. Additionally, the use of new carbon materials in electrode materials for ternary lithium batteries, referred to as LIBs, is increasing. These materials typically have high porosity and a large specific surface area. In this study, two types of nanoporous carbon (NC) commonly used in electrodes, namely Al-PCP-800 and ZIF-8–800, were prepared to investigate their effects on the carbothermic reduction stage of recycling spent batteries. The carbothermal reduction reactions of spent LIBs powder mixed with activated carbon and the two types of NC were examined using a thermogravimetric balance (TG/DTG). Kinetic characteristics were calculated in the interval of maximum weight loss rate using five kinetic models: VM, RPM, URCM, KAS, and FWO. The kinetic analysis revealed that the KAS and FWO models, which exhibited higher correlation coefficients, more accurately described the carbothermic reduction reactions. TG analysis showed that the sample mixed with 25 % ZIF-8–800 achieved the lowest temperature at the weight loss peak for the maximum weight loss rate, 769°C at a heating rate of 20 °C/min. Additionally, the reaction activity of NC with the positive material in the spent LIBs powder was stronger than that of activated carbon. Among the models, the sample mixed with 25 % ZIF-8–800 exhibited the lowest activation energies, recorded at 171.83, 28.48, 122.22, 199.49, and 143.45 kJ/mol, respectively. XRD and XPS characterizations of the roasted products from the spent LIBs powder mixed with the three carbon materials at various roasting end temperatures demonstrated that the cathode materials initially decomposed into Mn 3 O 4 , NiO, CoO, Li 2 O, and Li 2 CO 3 . At higher temperatures, Mn 3 O 4 , NiO, and CoO were further reduced to MnO, pure metallic Co, and pure metallic Ni, respectively. The sample mixed with ZIF-8–800 showed the most substantial reduction of metallic elements, with the relative contents of pure metallic Ni, pure metallic Co, and low-valent Mn elements reaching 5.50 %, 4.41 %, and 71.29 %, respectively, at a final roasting temperature of 800 °C. Therefore, NC demonstrated greater reactivity in the reduction reactions with the cathode material in the spent LIBs powder, ranking in the order of ZIF-8–800 > Al-PCP-800 > activated carbon.

Thermodynamic and experimental analysis of lithium selectively recovery from spent lithium-ion batteries by in-situ carbothermal reduction

Leaching Li from Mixed Cathode Materials of Spent Lithium-ion Batteries by Carbon Thermal Reduction

Recycling of valuable metals from spent lithium-ion batteries by self-supplied reductant roasting

Study on the reduction roasting of spent LiNixCoyMnzO2 lithium-ion battery cathode materials

Separation of Li and Al from spent ternary Li-ion batteries by in-situ aluminum‐carbon reduction roasting followed by selective leaching

A promising method for recovery of graphite and cathode materials from spent lithium-ion batteries

Enhanced Leaching of Metals from Spent Lithium-Ion Batteries by Catalytic Carbothermic Reduction

Preferentially selective extraction of lithium from spent LiCoO2 cathodes by medium-temperature carbon reduction roasting

Improved recovery of lithium from spent lithium-ion batteries by reduction roasting and NaHCO3 leaching

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Extraction of valuable metals from spent cathode materials by reductive roasting in methane atmosphere

A high-efficiency and low-carbon strategy for selective lithium recovery from spent lithium-ion batteries: Combining mechanochemical activation with biomass reduction roasting

Priority recovery of lithium and effective leaching of nickel and cobalt from spent lithium-ion battery

Carbothermal reduction between MOF-derived carbon and spent battery powder for metal recovery: Thermogravimetric behavior and kinetic analysis

An enhanced strategy based on the pyrolysis of bean dregs for efficient selective recovery of lithium from spent lithium-ion batteries

Cleaner recycling of cathode material by in-situ thermite reduction

Cleaner separation and recovery of valuable metals from spent ternary cathode via carbon dioxide synergetic thermite reduction strategy

Strengthening Valuable Metal Recovery from Spent Lithium-Ion Batteries by Environmentally Friendly Reductive Thermal Treatment and Electrochemical Leaching

Preferential and efficient extraction of lithium under the combined action of reduction of herb-medicine residue and leaching of oxalic acid

Converting spent lithium cobalt oxide battery cathode materials into high-value products via a mechanochemical extraction and thermal reduction route

A clean and efficient process for simultaneous extraction of Li, Co, Ni and Mn from spent Lithium-ion batteries by low-temperature NH4Cl roasting and water leaching