Abstract:Ships have become an important source of SO2 emission in coastal areas with the rapid development of maritime transport. It is of great significance to develop a marine scrubber for reducing SO2 emission of ships. In this study, numerical simulation of a full-scale marine spray scrubber is conducted to investigate two-phase flow pattern and SO2 absorption process in the scrubber. A desulfurization model based on seawater absorbent is coupled into the simulation, which considers the mass transfer between phases and seawater aqueous phase chemistry simultaneously. A distribution ring is introduced in the scrubber to enhance the desulfurization performance of the scrubber. The result of simulation shows that the distribution ring can optimize effectively the distribution of gas-liquid phases and enhance the SO2 absorption. Under vertical condition, the desulfurization efficiency could be promoted approximate 6% after installing a distribution ring. The inclined condition resulting from the ship swinging could lead to the uneven distribution of droplets and an obvious decrease (8.7%) of desulfurization efficiency, whereas the desulfurization performance of the scrubber could be ensured with a distribution ring installed even under an inclined condition. Finally, a spray scrubber design scheme has been developed and successfully applied in the exhaust gas cleaning system (EGCS) of a container ship. Test result shows the outlet average value of SO2/CO2 can be reduced to 3.55. Meanwhile, the consistency of test data and calculation result indicates the applicability of the numerical model established for the simulation and optimization of the scrubber in industrial applications also. Implications: EGCS is an effective method to reduce SO2 emission of marine industry. However, different from a land desulfurization tower, the application of a spray scrubber in EGCS faces more problems due to the different application scenarios and complex sea conditions (inclined condition resulting from ships swinging and so on) during sailing. In this work, a numerical model capable of investigating physical and chemical phenomena in the scrubber simultaneously is established, which can produce a great amount of data for the operation instruction of EGCS and the design and optimization of the marine spray scrubber. The distribution ring is introduced in the marine spray scrubber to intensify the SO2 absorption and enhance the desulfurization performance of the scrubber under different working conditions.

Simulation of SO2 removal process from marine exhaust gas by hybrid exhaust gas cleaning systems (EGCS) using seawater and magnesium-based absorbent

Simulation investigation on marine exhaust gas SO2 absorption by seawater scrubbing

Reconfiguration of Acid Gas Removal Process Matching the Integration of Coal Chemical Industry with Green Hydrogen

Simultaneous Removal of SO2 and NO from the Flue Gas of Marine Ships with a Gas Cyclone–Liquid Jet Absorption Separator

Simulation of SO2 absorption and performance enhancement of wet flue gas desulfurization system

Mechanism and technology of recovery flue gas desulphurization with magnesium oxide

The application of two-phase composite absorbent systems consisting of BAD and seawater resources in the wet treatment of ship exhaust gas

Membrane processes used to treat scrubber gas desulfuration washwater

CFD Simulation with Enhancement Factor of Sulfur Dioxide Absorption in the Spray Scrubber

Continuous SO2 absorption and desorption in regenerable flue gas desulfurization with ethylenediamine-phosphoric acid solution: A rate-based dynamic modeling

Combined removal experiment of NOx, SO2 and PM from marine diesel exhaust gas with SCR-DryEGCS system

Hybrid Modeling and Real-time Predictive Scheduling of Wet Flue Gas Desulfurization for Energy Saving and Life Extension

Mathematical modelling of a semi-dry SO 2 scrubber based on a Lagrangian-Eulerian approach

A brand new two-phase wet oxidation absorption system for the simultaneous removal of SO2 and NOX from simulated marine exhaust gas

An Overview of Flue Gas SO 2 Capture Technology Based on Absorbent Evaluation and Process Intensification

Ship tail gas washing and purifying system suitable for swing or start-stop complex working conditions

Mass transfer process intensification for SO2 absorption in a commercial-scale wet flue gas desulfurization scrubber

Performance Optimization of Wet Flue Gas Desulphurization System Based on CFD Technology

Simulation and Experimental Study on the Desulfurization for Smelter Off-Gas Using a Recycling Ca-based Desulfurizer

Marine Exhaust Gas Treatment Systems for Compliance with the IMO 2020 Global Sulfur Cap and Tier III NOx Limits: A Review

Mechanism of SO3/H2SO4 transformation and reduction in wet flue gas desulfurization systems