Abstract:Background The convectional strain-based algorithm has been widely utilized in clinical practice. It can only provide the information of relative information of tissue stiffness. However, the exact information of tissue stiffness should be valuable for clinical diagnosis and treatment. Methods In this study we propose a reconstruction strategy to recover the mechanical properties of the tissue. After the discrepancies between the biomechanical model and data are modeled as the process noise, and the biomechanical model constraint is transformed into a state space representation the reconstruction of elasticity can be accomplished through one filtering identification process, which is to recursively estimate the material properties and kinematic functions from ultrasound data according to the minimum mean square error (MMSE) criteria. In the implementation of this model-based algorithm, the linear isotropic elasticity is adopted as the biomechanical constraint. The estimation of kinematic functions (i.e., the full displacement and velocity field), and the distribution of Young’s modulus are computed simultaneously through an extended Kalman filter (EKF). Results In the following experiments the accuracy and robustness of this filtering framework is first evaluated on synthetic data in controlled conditions, and the performance of this framework is then evaluated in the real data collected from elastography phantom and patients using the ultrasound system. Quantitative analysis verifies that strain fields estimated by our filtering strategy are more closer to the ground truth. The distribution of Young’s modulus is also well estimated. Further, the effects of measurement noise and process noise have been investigated as well. Conclusions The advantage of this model-based algorithm over the conventional strain-based algorithm is its potential of providing the distribution of elasticity under a proper biomechanical model constraint. We address the model-data discrepancy and measurement noise by introducing process noise and measurement noise in our framework, and then the absolute values of Young’s modulus are estimated through the EFK in the MMSE sense. However, the initial conditions, and the mesh strategy will affect the performance, i.e., the convergence rate, and computational cost, etc.

Finite element model updating based on response reconstruction using a modified Kalman filter

Frequency Response Function-Based Finite Element Model Updating Using Extreme Learning Machine Model

FE-based Bridge Weigh-in-motion Based on an Adaptive Augmented Kalman Filter

Finite element model updating and response prediction of a frame structure based on optimal sensor placement

Finite element model updating based on response surface of the truncated singular values of frequency response functions

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos

Bridge finite element model updating using stochastic vehicle-induced static response monitoring data

Finite element model updating through derivative-free optimization algorithm

Finite element model updating method and its application

FRF-based pole-zero method for finite element model updating

Finite element model updating for repeated eigenvalue structures via the reduced-order model using incomplete measured modes

Nonlinear finite element model updating with a decentralized approach

Finite element model updating for structural applications

Model updating for real time dynamic substructures based on UKF algorithm

FE Model Updating Based on Adaptive Response Surface Method

Dynamic sensitivity-based finite element model updating for nonlinear structures using time-domain responses

Reconstruction of elasticity: a stochastic model-based approach in ultrasound elastography

Finite Element Model Updating using Acceleration and Angular Velocity *Hyun-jun

New Methods for Finite Element Model Updating Problems

Finite Element Model Updating Using Response Surface Method

Updating numerical models towards time domain alignment of structural dynamic responses with a limited number of sensors