Abstract:Environmentally assisted cracking can significantly affect the performance of high strength alloys and limit material selection to minimize the risk of subcritical crack growth in service. UNS N07718 is widely used in marine service applications and under a variety of conditions, such as: alternate immersion, different levels of cathodic protection, and freely corroding galvanic couples, because of its demonstrated corrosion and fracture resistance in these environments. In this work we developed a representative model of the material microstructure including the metal grains, the material texture, and the precipitates along the grain boundaries and within the grains. The microstructural model was subjected to the boundary conditions identified at the notch root of a fracture mechanics sample and the results are used as input for a simulation of hydrogen diffusion from the surface of the notch, assuming the material has been introduced to a hydrogen producing environment. The diffusion of hydrogen was modeled by Fick's law and included both hydrostatic stress and mobile dislocation velocity as driving forces. The influence of immobile dislocations was also modeled to account for the irreversible trapping. The results show that hydrostatic stress and immobile dislocation trapping can significantly alter the highest concentration of hydrogen and its location within the microstructure towards the fracture process zone. Mobile dislocation velocity has a small influence in determining the hydrogen distribution near the fracture process zone.

Hydrogen-assisted fatigue crack propagation bebavior of selective laser–melted Inconel 718 alloy

Effects of hydrogen and load frequency on the fatigue crack propagation behavior of selective laser melted Inconel 718 alloy

Effects of Crack Position on Fatigue Life of Large Seamless Storage Vessels Made of 4130X for Hydrogen Refueling Station

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Experimental and Crystal Plasticity Study on Hydrogen-Assisted Fatigue Crack Growth Behavior of IN625 Superalloy

Creep‐fatigue Deformation Characteristics and Life Prediction Model of Inconel 718 Superalloy under Hybrid Stress–strain‐controlled Mode

Hydrogen-Enhanced Fatigue Crack Growth in a Single-Edge Notched Tensile Specimen Under In-Situ Hydrogen Charging Inside an Environmental Scanning Electron Microscope

Tensile Mechanical Properties and Fracture Behaviors of Nickel-Based Superalloy 718 in the Presence of Hydrogen

Hydrogen-induced Delayed Fracture Behavior of Notched 316L Austenitic Stainless Steel: Role of Grain Refinement

The difference in fatigue crack growth induced by internal and external hydrogen in selective laser melted 304L stainless steel

Hydrogen Effect on the Fatigue Crack Growth in Austenitic Stainless Steel Investigated by a New Method Based on Nanohardness Distribution

Hydrogen diffusion behavior within microstructures near crack tip: A crystal plasticity study

Modeling hydrogen diffusion in precipitation hardened nickel-based alloy 718 by microstructural modeling

Combined Impact of Elastic Stress, Prestrain and Electrochemical Charging on the Hydrogen-Induced Cracking of High-Strength Steel

Hydrogen-assisted failure in partially recrystallized carbon alloyed equiatomic CoCrFeMnNi high-entropy alloy

Hydrogen Embrittlement of Ni-Based Superalloy Inconel 625 Fabricated by Wire Arc Additive Manufacturing: The Role of Laves Phase

Fatigue analysis of selective laser melting Inconel 718 and the mechanism of ductile–brittle continuous alternating steps during fatigue process

Effect of Hydrogen on Very High Cycle Fatigue Behavior of a Low-Strength Cr-Ni-Mo-V Steel Containing Micro-Defects

Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718

Failure mechanism and life correlation of Inconel 718 in high and very high cycle fatigue regimes

Enhanced strength-ductility synergy in a selective laser melted Inconel 718 superalloy by refining γ′′ precipitates