Abstract:Abstract In this work, the microstructure, precipitations, crystal orientation and texture of an Inconel 718 superalloy manufactured by selective laser melting (SLM) are investigated by performing post heat treatment. Horizontal and vertical reference faces are examined in the as-built condition, solution conditions for 0.5 and 1 h, and aging condition, respectively. In the as-built condition, Inconel 718 superalloy exhibited cellular and columnar dendrites, a large amount of the fine Laves phase, and several γ ′ phases. During post treatment, the grain size on the horizontal face is changed, which is ranged from 502.23 to 523.55 μ m 2 per grain. Meanwhile, grains coarsened distinctly on the vertical face. The average area of the grain is 739.48 μ m 2 in the as-built condition and increases to 898.19 μ m 2 in the aging condition. Additionally, the amount of MC carbides, γ ′, and γ ′′ strengthening phases increased as well during the post heat treatment process, while that of the Laves phase decreased after solution treatment. The preferred orientation on the horizontal face was 〈111〉//X, 〈001〉//Y in the as-built condition, and 〈101〉//Z in the solution and aging conditions. The preferred orientation on the vertical face was 〈001〉//X, 〈101〉//Y in the as-built condition, 〈101〉//Y in the solution condition, and 〈001〉//X in the aging condition. The orientation distribution function (ODF) analysis showed that the main textures in the as-built and solution conditions were {110}〈110〉 and {110}〈112〉, respectively, which transformed to {001}〈100〉 and {001}〈110〉 during aging. The values of multiples of uniform density (mud) in both horizontal and vertical reference faces the aforementioned preferred orientation and texture increased during post heat treatment. Application of post heat treatment can lead to an ideal microstructure Inconel 718 superalloy manufactured by SLM.

Enhanced strength-ductility synergy in a selective laser melted Inconel 718 superalloy by refining γ′′ precipitates

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

Effect of heat treatment on microstructure and mechanical properties of selective laser melted Inconel 718 alloy

Heat treatment for selective laser melting of Inconel 718 alloy with simultaneously enhanced tensile strength and fatigue properties

Outstanding strength-ductility synergy in Inconel 718 superalloy via laser powder bed fusion and thermomechanical treatment

Enhanced strength of additively manufactured Inconel 718 by means of a simplified heat treatment strategy

Microstructural evolution and mechanical properties of Inconel 718 alloy manufactured by selective laser melting after solution and double aging treatments

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Improving High-Temperature Mechanical Properties of Additively Manufactured Inconel 718 Through Heat Treatment

Microstructural evolution and mechanical properties of IN718 alloy fabricated by selective laser melting following different heat treatments

Achieving excellent strength-ductility combination in an Inconel 625 superalloy via short-term stress-aging treatment

Microstructures and High-Temperature Mechanical Properties of Inconel 718 Superalloy Fabricated via Laser Powder Bed Fusion

Mechanically Blended Al: Simple but Effective Approach to Improving Mechanical Property and Thermal Stability of Selective Laser-Melted Inconel 718

Rolling-assisted direct energy deposited Inconel 718: Microstructural evolution and mechanical properties after optimized heat treatment

Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting

Two-stage annealing treatment to uniformly refine the microstructure, tailor δ precipitates and improve tensile properties of Inconel 718 alloy

Investigation on the influence of heat treatment on Inconel 718 fabricated by selective laser melting: Microstructure and high temperature tensile property

Effects of post heat treatment on the microstructure evolution of Inconel 718 manufactured by selective laser melting

Effects of a modified heat-treatment on microstructure and mechanical properties of additively manufactured Inconel 718

Influence of Homogenization on Phase Transformations during Isothermal Aging of Inconel 718 Superalloys Fabricated by Additive Manufacturing and Suction Casting

Effect of heat treatment on microstructures and mechanical properties of Inconel 718 additively manufactured using gradient laser power