Abstract:The high thermal gradients during the laser powder bed fusion (LPBF) process induce an inhomogeneous microstructure with anisotropic mechanical properties. This study developed a dislocation-based strain-gradient crystal plasticity finite element (CPFE) model to reveal the microstructure-based deformation mechanisms and quantify their strengthening contributions to the mechanical property anisotropy of LPBF-ed Inconel 718 (IN718) superalloy. The analyzed microstructural attributes included 1- crystallographic orientations/misorientations, 2- solid solutions (SS), 3- grain size and morphologies, and 4- dislocation dynamics, such as statistically stored dislocations (SSDs) and geometrically necessary dislocations (GNDs). The investigated mechanical properties contained tensile strength, fatigue resistance, fracture mechanisms, and their anisotropy under loading towards building (BD) and transverse (TD) directions. The experimentally obtained microstructural features of the as-LPBF-ed IN718 were synthesized into the crystal plasticity representative volume elements (CPRVE) to model the deformation behavior using a user-defined material subroutine (UMAT) in the ABAQUS solver. The energy-based fatigue indicator parameter (FIP) captured the fatigue properties and failure mechanisms. The main slip-strengthening contributions stemmed from SSDs, grain size, SS, and GNDs. in TD. The corresponding order in BD was SSDs, SS, GNDs, and grain size because the grain dimensions were larger in BD than in TD. The grain-size effect had the highest contribution to the tensile property anisotropy, followed by SSDs, GNDs, and SS. Aside from their strengthening effects, crystal texture and grain size induced mechanical property heterogeneity and fatigue sensitivity at grain boundaries, reducing their contributions to fatigue strength relative to tensile. In contrast to the previous findings, local accumulations of SSDs and GNDs at softer sides of grain boundaries during cyclic loading reduced the strength heterogeneity in these areas, improving fatigue properties. The highest slip-strengthening effect for fatigue resistance and anisotropy was under SSDs, followed by GNDs, SS, and grain size.

Fatigue analysis of selective laser melting Inconel 718 and the mechanism of ductile–brittle continuous alternating steps during fatigue process

Role of defects and microstructure on the fatigue durability of Inconel 718 obtained by additive layer manufacturing route

Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718

High‐Temperature Mechanical Behavior Assessment based on a Developed Constitutive Model of Inconel 718 Fabricated by Selective Laser Melting

Very-High-Cycle-Fatigue Property of IN 718 Manufactured by Selective Laser Melting at Elevated Temperature: Microstructure-Related Failure Behavior and Life Prediction

Multi-scale Study of Subsurface Fatigue Cracking Behavior of Laser-Powder Bed Fused Inconel 718 at Stress Ratios and Temperatures

Impact of annealing treatment on the fatigue behavior of Inconel 625 produced by laser‐based powder bed fusion

Fatigue assessment of as‐built and heat‐treated Inconel 718 specimens produced by additive manufacturing including notch effects

Fracture Mechanisms Induced by Microporosity and Precipitates in Isothermal Fatigue of Polycrystalline Nickel Based Superalloy

Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension

Tensile and Low‐Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room‐ and High Temperature

Cracking Mechanism and Susceptibility of Laser Melting Deposited Inconel 738 Superalloy

In-situ SEM-EBSD investigation of the low-cycle fatigue deformation behavior of Inconel 718 at grain-scale

On the Microstructure and Tensile Properties of Inconel 718 Alloy Fabricated by Selective Laser Melting and Conventional Casting

Anisotropic Stress Rupture Properties-Microstructure Relationships in SLM Inconel 718 Alloy

Experimental and Modeling Study on Small Fatigue Crack Initiation and Propagation Behavior of Inconel 617

Crystal Plasticity Quantification of Anisotropic Tensile and Fatigue Properties in Laser Powder Bed Fused Inconel 718 Superalloy

Cyclic microstructure analysis, crack propagation and life prediction of Inconel 750H considering the slip fracture energy

Anisotropic damage evolution and modeling for a nickel-based superalloy built by additive manufacturing

Microstructural characterization and fatigue performance of the recast material induced by laser manufacturing of a nickel-based superalloy

A unified material model for multiaxial ductile fracture and extremely low cycle fatigue of Inconel 718