Abstract:First documented in 1875, the deterioration of mechanical properties of hydrogen-containing metals is a long-standing yet unsolved problem in materials science. In this work, the evolution of dislocation structures in different orientated grains (i.e., near [100], [110], and [111]) of the uncharged and hydrogen-charged (400 and 1200 ppm) polycrystalline Ni were systematically investigated by combining electron backscatter diffraction, focused ion beam and scanning transmission electron microscopy. By using site-specific characterization methods, for the first time, we discover that hydrogen-enhanced localized plasticity (HELP) is orientation-dependent, with the following sequence: [100] > [111] > [110]. Massive incompatibility between different orientated grains, induced by the orientation dependence of HELP, contributes to the premature intergranular fracture of Ni, especially for the 400 ppm H-charged Ni. Our results suggest that optimizing orientation distribution is a potential approach for enhancing metals' resistance to hydrogen damage. The relative contribution of HELP and hydrogen-enhanced decohesion (HEDE) mechanisms in hydrogen embrittlement of Ni is also analyzed quantitatively for 400 and 1200 ppm H-charged samples. For 400 ppm H-charged Ni, a strong synergistic interaction exists between HELP and HEDE mechanisms, and the HELP mechanism plays a critical role in premature fracture. While for 1200 ppm H-charged Ni case, HELP effect on final failure is marginal and HEDE is the dominant embrittlement mechanism.

Effect of hydrogen on nanomechanical properties of Inconel 625 studied using in-situ electrochemical nanoindentation technique

Distinct Evidence of Hydrogen-Enhanced Defect Formation on Pre-Strained Nickel Alloy 625 during In Situ Electrochemical Nanoindentation Test

An In-Situ Electrochemical Nanoindentation (ECNI) Study on the Effect of Hydrogen on the Mechanical Properties of 316L Austenitic Stainless Steel

Hydrogen-enhanced homogeneous dislocation nucleation of nanoindentation in nickel

Hydrogen Effect on the Deformation Evolution Process in Situ Detected by Nanoindentation Continuous Stiffness Measurement

A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy

Hydrogen Effect On The Deformation Behavior Of Austenitic Stainless Steels Investigated By Nanoindentation

Effect of stress level on hydrogen-induced nanohardness variations in CoCrNi medium-entropy alloy

The effect of plastic deformation on hydrogen diffusion in nickel Alloy 625

Effect of Hydrogen on Microstructure, Mechanical Properties, and Fracture Behavior of 35NCD16 Fastener Steels

Hydrogen-assisted fatigue crack propagation bebavior of selective laser–melted Inconel 718 alloy

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Nanoindentation Study on the Local Evaluation of Hydrogen-Induced Hardening Performance of Ferrite and Austenite in 2205 Duplex Stainless Steel: Experiment and Finite Element Modeling

Influence of hydrogen behaviors on tensile properties of equiatomic FeCrNiMnCo high-entropy alloy

Investigation of the electroplastic effect using nanoindentation

Hydrogen Effect on Nanoindentation Creep of Austenitic Stainless Steel: A Comparative Study Between Primary Creep Stage and Steady-State Creep Stage

Dependence of Strain Rate on Hydrogen-Induced Hardening of Austenitic Stainless Steel Investigated by Nanoindentation

Effect of hydrogen charging time on hydrogen embrittlement of CoCrFeMnNi high-entropy alloy

Effect of Hydrogen and Strain Rate on Nanoindentation Creep of Austenitic Stainless Steel

Hydrogen-prompted heterogeneous development of dislocation structure in Ni

Influence of hydrogen on the elastic properties and dislocation behavior in Fe–Cr and Fe–Ni alloys by DFT calculations