Abstract:Generally, the function of thermal interface material (TIM) is filling rough surfaces, eradicating air pockets, decreasing thermal resistance, and improving heat dissipating effects. On this basis, we provide the TIM with another identity, "adhesion", rendering it not only play a role of heat dissipation, but also serve as an adhesive to bond contacting surfaces. In this work, nano- to microscopic liquid metal (LM) droplets are embedded into the epoxy matrix to fabricate a LM-epoxy in-situ cured composite. By adding the curing agent, the LM-epoxy composite is cured into an entity structure, transforming from an amorphous grease state to a self-adaptive pad state. When the average droplet size is in a reasonable range of approximately 5–25 μm, the composite's thermal resistance ( R total ) decreases to 2.19 mm 2 K/W at 70% volume fraction with its adhesive strength of 0.497 MPa, and the thermal conductivity ( k TIM ) could increase to 10.05 W/(m·K) at 85%. Both R total and k TIM change rapidly for droplet size approximately ranging from 10 2 nm to 10 1 μm and then tend to level off when it further increases to 10 2 μm. A conception of equivalent contact thickness, δ, is presented to elucidate the contacting thermal resistance R c , and set up predictive models of R total for different volume fractions by considering the microscopic interfacial thermal resistance R b between filler and matrix or not. This composite simultaneously possesses characteristics of the low thermal resistance like thermal grease, the whole entity like thermal pad, and the anti-leak characteristics by in-situ cured process. Actual cooling tests show it has a considerable temperature difference of 4.75 °C lower than the commercial thermal grease at 650 W heating power. This in-situ cured strategy, via decreasing the thermal resistance and solving the problem of LM leakage, remarkably promotes the LM-TIMs achieving a broader application prospect in the future.

3D printable phase change based thermal interface material with lower total thermal resistance at operating temperature

Low Interfacial Thermal Resistance Between Crossed Ultra-Thin Carbon Nanothreads

A Novel Phase Change Composite with Ultrahigh Through-Plane Thermal Conductivity and Adjustable Flexibility

Compliance-tunable thermal interface materials based on vertically oriented carbon fiber arrays for high-performance thermal management

A graphene nanoflake-based flexible composite phase change material for enhanced heat dissipation in chip cooling

High-performance non-silicone thermal interface materials based on tunable size and polymorphic liquid metal inclusions

Patternable thermal conductive interface materials enabled by vitrimeric phase change materials

Anti-leak, self-adaptive liquid metal-epoxy in-situ cured composites with ultra-low thermal resistance via flexible droplet inclusions

Phase change mediated graphene hydrogel-based thermal interface material with low thermal contact resistance for thermal management

Highly conductive thermal interface materials with vertically aligned graphite-nanoplatelet filler towards: High power density electronic device cooling

Improvement of interfacial thermal resistance between TIMs and copper for better thermal management

Enhanced thermal performance of hybrid interface materials supported by 3D thermally conductive SiC framework

Thermally conductive composite phase change materials with excellent thermal management capability for electronic devices

Liquid Metal Nano/micro-Channels As Thermal Interface Materials for Efficient Energy Saving

Dry-Contact Thermal Interface Material with the Desired Bond Line Thickness and Ultralow Applied Thermal Resistance

Constructing the Snail Shell-Like Framework in Thermal Interface Materials for Enhanced Through-Plane Thermal Conductivity

Interface Phonon Scattering Suppression Boosts Heat Conduction in Thermal Interface Materials

The polymer-based thermal interface materials with improved thermal conductivity, compression resilience, and electromagnetic interference shielding performance by introducing uniformly melamine foam

Stable self-crosslinking phase change composites with vertically aligned boron nitride for high thermal conductivity thermal interface materials

Spatial Thermal Conductivity Variation of Particulate-Filled Thermal Interface Materials

Millefeuille-Inspired Thermal Interface Materials based on Double Self-Assembly Technique for Efficient Microelectronic Cooling and Electromagnetic Interference Shielding