Abstract:Solid–liquid phase change materials (PCMs) are widely used in heat management. However, the requirement of no leakage of solid–liquid PCMs during phase transition and suitable deformability at evaluated temperature are contradictory when PCMs are used as thermal interface materials (TIMs). Vitrimer, a kind of material that combines with the advantages of both thermoplastics and thermosets, may be a solution. Herein, polyethylene wax vitrimer (PEWV) is prepared through the dioxaborolane exchange reaction for TIMs with leakage-proof and high-energy-storage ability. Microphase separation occurs between highly cross-linked skeleton and slightly cross-linked chains, which solves the leakage problem of polyethylene wax. Simultaneously, PEWV can achieve a high latent heat storage capacity of about 121.0 J g–1, about 74% of that of PEW, owing to the negligible effect of dynamic cross-linking on the crystallization of PEW. Meanwhile, PEWV can be plastically deformed and tightly adhered to the rigid surface under a slight external force at the phase change temperature, filling the gap at macro- and microscales for improving the heat transfer efficiency. The composites of PEWV and thermal conductive filler show more excellent performance as TIMs than commercial thermal conductive pads. PEWV with no leakage, excellent plasticity, and high latent heat storage capacity provides great application potential in heat storage and thermal interface management.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02052.Composition of PEWV and the measured grafting rate and insoluble fraction, FTIR spectra of physical blends of PEW with DM and linear fitting of peak intensity at 1704 cm–1, phase-change properties of PEW, PEWV, and PEWV/EG composites, the real and theoretical melting and freezing enthalpy of PEW and PEWV, XRD patterns of PEW and PEWV, FTIR spectra of PEWV-16% before and after 100 thermal cycles, TG curves of DM, BD, and PEWV/EG composites, detailed information concerning the thermal conductivity of Laird T-FLEX760 and PEWV/EG composites (PDF)This article has not yet been cited by other publications.

Patternable thermal conductive interface materials enabled by vitrimeric phase change materials

Leakage-Proof and Malleable Polyethylene Wax Vitrimer Phase Change Materials for Thermal Interface Management

Epoxy Resin-Based Gel Phase Change Material for Strong Interface Bonding and Interface Thermal Management

Compliance-tunable thermal interface materials based on vertically oriented carbon fiber arrays for high-performance thermal management

A graphene nanoflake-based flexible composite phase change material for enhanced heat dissipation in chip cooling

A Novel Phase Change Composite with Ultrahigh Through-Plane Thermal Conductivity and Adjustable Flexibility

High damping, soft and reprocessable thermal interface materials inspired by the microstructure of skin tissue

Multiway Softness Polyurethane Elastomeric Composite with Enhanced Thermal Conductivity and Application as Thermal Interface Materials

Enhanced thermal performance of hybrid interface materials supported by 3D thermally conductive SiC framework

Vertically aligned carbon fibers-penetrated phase change thermal interface materials with high thermal conductivity for chip heat dissipation

Improving through-plane thermal conductivity of PDMS-based composites using highly oriented carbon fibers bridged by Al2O3 particles

Experimental and numerical assessments of thermal transport in phase change material embedding additively manufactured triply periodic minimal surfaces: A comparative evaluation

Tree-ring structured phase change materials with high through-plane thermal conductivity and flexibility for advanced thermal management

Thermally conductive composite phase change materials with excellent thermal management capability for electronic devices

Hierarchically Encapsulated Phase-Change Film with Multi-stage Heat Management Properties and Conformable Self-Interfacing Contacts for Enhanced Interface Heat Dissipation

Polystyrene Shell-Based "Coconut-Like" and "Pomegranate-Like" Microencapsulated Phase Change Materials: Formation Mechanism, Thermal Conductivity/Stability Enhancement and Their Application in Thermal Management

Joint‐Inspired Liquid and Thermal Conductive Interface for Designing Thermal Interface Materials with High Solid Filling yet Excellent Thixotropy

A Novel Room-Temperature Flexible Phase Change Material for Solar Energy Photothermal Conversion and Battery Thermal Management

Scalable Flexible Phase Change Materials with a Swollen Polymer Network Structure for Thermal Energy Storage

Efficient preparation of polydimethylsiloxane-based phase change composites by forced network assembly with outstanding thermal management capability

Open package form-stable phase change microspheres with low thermal contact resistance for the thermal management of electronic devices