Abstract:Laser polishing was used to reduce the surface roughness and improve the surface properties of alumina ceramics. In this paper, a response surface experimental design scheme is used to establish a mathematical model based on the Box–Behnken central combination principle, with the surface roughness as the optimization target to optimize the optimal process parameters for the laser polishing of alumina ceramics, to suppress the polished surface cracks by preheating the material, and to study the changes of surface properties of laser-polished alumina ceramics under different preheating temperatures. The optimal laser polishing process parameters were optimized by response surface experiments with a scanning speed of 323.5 mm/s, a laser power of 73.63 W, a pulse frequency of 2.3 kHz, and a scanning spacing of 0.09 mm; compared with the initial surface roughness of 4.67 μm, the polished surface roughness was 0.96 μm under the experimentally optimized polishing parameters, and the surface cracks were suppressed after the preheating treatment. The surface roughness was further reduced to 0.74 μm, and the surface wear coefficient was reduced from 0.5939 to 0.5725, while the surface hardness was increased from 1810 to 2063 HV. Optimization of the laser polishing process parameters through the response surface can significantly reduce the surface roughness of the material, while the flame preheating, assisted by the laser-polished surface wear resistance and hardness, is improved.

Laser pretreatment enhances the laser-induced damage threshold of MgAl_2O_4 transparent ceramics

Researches on Laser Damage Resistance of Optical Films

Effect of multi-waveband antireflective coating on laser induced damage threshold of MgO doped LiNbO3

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Surface damage induced by micropores in transparent ceramics under nanosecond laser irradiation

Nonlinear optical effects in polycrystalline transparent Al2O3 ceramics using femtosecond laser pulses—supercontinuum generation and laser damage

Thermodynamic damage behavior of single-crystal MgF2 irradiated by high-power fiber laser

Effect of the Dynamic Porous Structure Generation in Laser Irradiated Multi-Functional Coatings

Experimental Investigation on Laser-Induced Surface Damage Threshold of Nd-Doped Phosphate Glass

Experimental Investigation of Enhancing the Subsurface Damage Threshold of Nd-Doped Phosphate Glass

Melt-grown behaviour of heat treated high-purity alumina ceramics prepared by laser directed energy deposition

Investigation on pulsed laser damage resistance of high-absorption ceramic coatings

Damage characteristics of 193 nm laser irradiated on MgF2 window

Laser-induced damage properties of antireflective porous glasses

Ablation behavior of glass fiber reinforced polybenzoxazine composites irradiated by high energy continuous-wave laser

Femtosecond laser surface modification of magnesium aluminate spinel and its effect on polishing

Rod-shaped LuAG:Ce transparent ceramic enabling ultrahigh forward efficiency for laser lighting in a transmissive mode

Progress of laser surface treatment on magnesium alloy

Carbon fiber reinforced ZrC based ultra-high temperature ceramic matrix composite subjected to laser ablation: Ablation resistance, microstructure and damage mechanism

Toward improving the reflectivity of ablative heat-insulating coating under high-energy laser irradiation

Flame-Assisted Laser Polishing of Alumina Ceramic Surface Properties