Abstract:In this work, the LTCC composite materials containing fused silica and monoclinic zirconia ceramic particles, respectively, which based on the composite matrix composed of the barium borate glassy matrix and α-alumina ceramic particles, were prepared by traditional solid-state preparation process at a sintering temperature of 900°C. Sintering mechanism and physical properties, e.g. dielectric properties and coefficient of thermal expansion (CTE), of the LTCC composite ceramics are investigated and discussed in detail in terms of their mineral phase composition. The results indicate that a barium borate glassy phase can be easily formed from a barium borate compound, which is obtained by the chemical combination of barium hydroxide octahydrate and an aqueous solution of boric acid, at a sintering temperature of 900°C. In turn, the barium borate glassy melts can supply a liquid phase sintering aid for the fabrication of the LTCC composite ceramics with the sintering temperature of 900°C during sintering. The introduction of the α-alumina ceramic particles to the barium borate glassy matrix can improve the sintering behavior whereas the presence of fused silica or monoclinic zirconia particles in the composite ceramics is important to adjust the dielectric, thermal and mechanical properties of the LTCC composite materials. The work may be referenced for the fabrication of multi-layer LTCC structures with tailored physical properties.

Specifics of Obtaining a Vacuum-Tight Weakly Conductive Ceramics Based on Barium Aluminate

Crystal Structure, Infrared Reflectivity Spectra and Microwave Dielectric Properties of CaAl2O4 Ceramics with Low Permittivity

Colossal Dielectric Performance of Pure Barium Titanate Ceramics Consolidated by Spark Plasma Sintering

Preparation of the LTCC Composite Ceramics with Low Permittivity

Preparation of ultralow thermal conductivity (Mg<sub>0.5</sub>Ca<sub>0.3</sub>Ba<sub>0.2</sub>) (AlSi)<sub>2</sub>O<sub>8</sub> ceramics

Crystal Structure and Temperature Dependence of Permittivity in Barium Aluminate Based Solid Solutions

Microwave dielectric properties of a novel Li2O–Al2O3–B2O3 glass-ceramic for ULTCC application

Low-temperature Synthesis of Highly Dispersed Barium Aluminate

High Performance of LTCC with Al2O3/BN Biphasic Ceramics based on BBSZ Glass

High Performance of Low-Temperature-Cofired Ceramic with Al<sub>2</sub>O<sub>3</sub>/BN Biphasic Ceramics Based on B<sub>2</sub>O<sub>3</sub>-Bi<sub>2</sub>O<sub>3</sub>-SiO<sub>2</sub>-Z nO Glass

Submicron Barium Hexaferrite Ceramics Manufactured by Low-Temperature Liquid-Phase Sintering of BaFe12O19 Nanoparticles

Confined Gelation Synthesis of Flexible Barium Aluminate Nanofibers as a High-Performance Refractory Material

Designing Barium Titanate Ceramics with High Energy Storage and Mechanical Properties

Preparation and Properties of the Barium Borate Glassy Matrix Composite Materials Containing Fused Silica and Monoclinic Zirconia

Impedance Spectroscopy and Dielectric Properties of BaAl(2−2)(Zn0.5Ti0.5)2O4 Ceramics

Ultrafast high-temperature sintering of barium titanate ceramics with colossal dielectric constants

Lightweight porous Al2O3‐based ceramics with highly controllable performance via binder jetting

Mechanical and Optical Properties of Transparent Alumina Obtained by Rapid Vacuum Sintering

Preparation of low-permittivity K2O–B2O3–SiO2–Al2O3 composites without the addition of glass

The Influence of Alumina to Microstructure and Dielectric Properties for Low Temperature Co-Fired Ceramics

Liquid Phase Sintering of Barium Titanate Ceramics for High Energy Density Capacitors