Preparation of low-permittivity K2O–B2O3–SiO2–Al2O3 composites without the addition of glass

Yong Shang,Chaowei Zhong,Ruonan Jia,Huajing Xiong,Hao Li,Xinyuan Li,Xian Jian

DOI: https://doi.org/10.1515/ntrev-2019-0041

2019-12-18

Nanotechnology Reviews

Abstract:Abstract In the field of low temperature co-fired ceramic (LTCC), it remains a challenge to design the performance of LTCC with low permittivity less than 5. Here, the K 2 O– B 2 O 3 –SiO 2 –Al 2 O 3 composites are prepared without the preparation of prior glass. Meanwhile, the factors of the CaO content on microstructure, phase structure and properties of the composites are considered systematically. The crystal structure measured by X-ray diffraction (XRD) shows that there are quartz and alumina as the crystal phases. The results reveals that the tailoring CaO content benefits sintering densification, low dielectric loss, great mechanical properties and low thermal expansion coefficient. As CaO content increases up to 2.8 wt%, the composites sintered at 850 ∘ C have a dielectric constant of 4.94 and tan δ of 8 × 10 −4 at 1 MHz, thermal expansion coefficient (CTE) of 8.5 ppm/ ∘ C, and flexural strength of 150 MPa. As the mass fraction of CaO increases up to 3.2 wt%, the maximum flexural strength of 173MPa is achieved. The above study provides an effective approach for preparing the novel composites as a promising candidate for LTCC applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry