Microstructure and Dielectric Properties of Ca-Al-B-Si-O Glass/Al2o3 Composites with Various Alkali Oxides Contents

Ming Liu,Hong-qing Zhou,Hai-kui Zhu,Zhen-xing Yue,Jian-xin Zhao
DOI: https://doi.org/10.1007/s11771-012-1334-5
2012-01-01
Journal of Central South University
Abstract:The effects of alkali oxides (Na 2 O and K 2 O) addition on both the sintering behavior and dielectric properties of Ca-Al-B-Si-O glass/Al 2 O 3 composites were investigated by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimeter (DSC), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The results show that the increasing amount of alkali oxides in the glass causes the decrease of [SiO 4 ], which results in the decrease of the continuity of glass network, and leads to the decrease of the softening temperature T f of the samples and the increasing trend of crystallization. And that deduces corresponding rise of densification, dielectric constant, dielectric loss of the low temperature co-fired ceramic (LTCC) materials and the decrease of its thermal conductivity. By contrast, the borosilicate glass/Al 2 O 3 composites with 1.5% (mass fraction) alkali oxides sintered at 875 °C for 30 min exhibit better properties of a bulk density of 2.79 g/cm 3 , a porosity of 0.48%, a λ value of 2.28 W/(m·K), a ɛ r value of 7.82 and a tan δ value of 9.1×10 −4 (measured at 10 MHz).
What problem does this paper attempt to address?