Abstract:The effects of injecting TiO2 to a Li2O–MgO–ZnO–B2O3–SiO2 (LMZBS) microwave dielectric composite on sinterability, microstructure, crystalline phase, dielectric characteristics, mechanical characteristics, and coefficient of thermal expansion (CTE) were investigated. With the increase of TiO2 content, the main crystal orientation of the samples gradually changed from Li2MgSiO4 phase, Mg3B2O6 phase, and Mg2SiO4 phase to Li5.48Mg0.74Ti7.26O18, ZnTiO3 phase, and Mg2B2O5 and the densification temperature decreased, whisker-like crystal grains gradually increased, and the porous microstructure appeared at 15% TiO2. With the increase of TiO2 content, the densification temperature of LMZBS ceramics increases, and the dielectric constant increases with the increase of densification temperature. The CTE value decreases with the increase of titanium dioxide content, and the bending strength increases first and then decreases with the increase of titanium dioxide content. The composite with 10 wt% TiO2 content sintered at 900 °C exhibits superior performance: εr\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$${\varepsilon }_{\text{r}}$$\end{document} of 7.97, Q value of 1305 (10 GHz), flexural strength of 259 MPa, CTE value of 10.2 ppm/°C, and τf\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$${\tau }_{\text{f}}$$\end{document} value of − 13 ppm/°C. The LMZBS/TiO2 composites are suitable for LTCC application with match-well Ag electrodes.

Thermal and dielectric properties of the LTCC composites based on the eutectic system BaO–Al2O3–SiO2–B2O3

Tuning high and low thermal expansion coefficients of Li2O–BaO–Al2O3–B2O3–SiO2/quartz LTCC composites by replacing quartz partly with α-Al2O3 or ZrO2

Design and preparation of BaO–Al2O3–SiO2–B2O3/Quartz LTCC composites with tailored coefficient of thermal expansion

Effect of silica addition on microstructure, sintering behavior, and dielectric properties of borosilicate glass/alumina composites for LTCC application

Preparation of low-permittivity K2O–B2O3–SiO2–Al2O3 composites without the addition of glass

Low temperature sintering and characteristics of K2O–B2O3–SiO2–Al2O3 glass/ceramic composites for LTCC applications

Enhanced thermal and mechanical properties of Li–Al–Si composites with K2O–B2O3–SiO2 glass for LTCC application

Effect of TiO2 on the sintering temperature and dielectric properties of Li2O–MgO–ZnO–B2O3–SiO2 ceramic composites for LTCC applications

Lead-free borosilicate glass/fused quartz composites for LTCC applications

Microwave dielectric characterization and densification mechanism analysis of CaO‐B2O3‐SiO2 glass‐ceramic/Al2O3 composites for LTCC applications

Low Temperature Sintering and Dielectric Properties of Ca- Ba-Al-B-Si-O Glass/Al_2 O_3 Composites for LTCC Applications

Improved flexural strength and dielectric loss in Al2O3-based LTCC with La2O3–CaO–B2O3–SiO2 glass

Sintering behavior and properties of CABS/MgAl2O4 composite for LTCC applications

Sintering, densification and crystallization of Ca–Al–B–Si–O glass/Al 2 O 3 composites for LTCC application

Compositional Design of Lead-Free, Low-Temperature Cofired Ceramic Dielectric Composite

The Influence of Alumina to Microstructure and Dielectric Properties for Low Temperature Co-Fired Ceramics

Phase evolution and dielectric properties of La2O3–B2O3–ZnO glass-ceramics/Al2O3 composites for LTCC substrates at high frequencies

Synthesis, microstructure and characterization of Ultra-low permittivity and dielectric loss ZnO-B2O3-SiO2 glass/SiO2 composites for LTCC application

Sintering Characteristics, Microstructures and Dielectric Properties of Borosilicate-Based Glass/alpha-Al2o3 Composites for LTCC Application with Different MgO and Na2O Contents

Tailoring sintering kinetics and dielectric properties of Li2SiO3 ceramics by CaO–B2O3–SiO2 glass dopant for LTCC substrate applications

High Performance of LTCC with Al2O3/BN Biphasic Ceramics based on BBSZ Glass