Abstract:Wood as a material is a natural composite with a complex hierarchically arranged structure. All scale levels of wood structure contribute to its macroscopic mechanical properties. The nature of such characteristics and deformation modes differs radically at different scale levels. Wood macroscopic properties are well studied, and the relevant information can be easily found in the literature. However, the knowledge of the deformation mechanisms at the mesoscopic level corresponding to the cellular structure of early and late wood layers of annual growth rings is insufficient. It hinders building the comprehensive multiscale model of how wood mechanical properties are formed. This paper described the results of scanning of mechanical properties of softwood and hardwood samples, such as common pine, small-leaf lime, and pedunculate oak, by means of nanoindentation (NI). The NI technique allows varying the size of deformed region within a wide range by altering maximal load ( P max ) applied to the indenter so that one can repeatedly and non-destructively test wood structural components at different scale levels on the same sample without changing the technique or equipment. It was discovered that the effective microhardness ( H eff ) and Young's modulus ( E eff ) decreased manifold with P max growing from 0.2 to 2 000 mN. This drop in H eff was observed when the locally deformed region grew, and resulting from P max increase generally follows the rule similar to the Hall-Petch relation for yield stress, strength, and hardness initially established for metals and alloys, though obviously in those cases the underlying internal mechanisms are quite different. The nature and micromechanisms of such size effect (SE) in wood revealed using NI were discussed in this study. At P max 200 mN, the indentation encompassed several cells. The measured mechanical properties were significantly affected by bending deformation and buckling collapse of cell walls, reducing H eff and E eff substantially. At P max ≈ 1–100 mN, an indenter interacted with different elements of the cell structure and capillary network, resulting in intermediate values of H eff and E eff . Abrupt changes in H eff and E eff at annual growth ring boundaries allow accurate measuring of rings width, while smoother and less pronounced changes within the rings allow identification of earlywood and latewood layers as well as any finer changes during vegetation season. The values of ring width measured using NI and standard optical method coincide with 2%−3% accuracy. The approaches and results presented in this study could improve the understanding of nature and mechanisms lying behind the micromechanical properties of wood, help to optimize the technologies of wood farming, subsequent reinforcement, and utilization, as well as to develop new highly informative techniques in dendrochronology and dendroclimatology.

Techniques for high resolution imaging of wood structure: a review

Imaging of Structural Timber Based on In Situ Radar and Ultrasonic Wave Measurements: A Review of the State-of-the-Art

Non-destructive wood identification using X-ray μCT scanning: which resolution do we need?

Detection of Knot Defects on Coniferous Wood Surface Using Near Infrared Spectroscopy and Chemometrics

Comparative Study of Ultrasonic Techniques for Reconstructing the Multilayer Structure of Composites

Microspectroscopy as applied to the study of wood molecular structure

A Review on Acoustics of Wood as a Tool for Quality Assessment

Advancement and challenges in sample preparation for Atomic Force Microscopy and Infrared Microscopy for wood‐based materials

Direct Chemical Characterization of Natural Wood Resins by Temperature-Resolved and Space-Resolved Fourier Transform Infrared Spectroscopy

Scientific Computational Visual Analysis of Wood Internal Defects Detection in View of Tomography Image Reconstruction Algorithm

Automated quantification of the impact of the wood-decay fungus Physisporinus vitreus on the cell wall structure of Norway spruce by tomographic microscopy

Exploring visible spectrum wavelengths in light transmission through wood material

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing

Raman imaging: An indispensable technique to comprehend the functionalization of lignocellulosic material

Innovative methods of non-destructive evaluation of log quality

Near Infrared Hyperspectral Imaging Applied to Mapping Chemical Composition in Wood Samples

Tree Core Analysis with X-ray Computed Tomography

Multiscale Wood Micromechanics and Size Effects Study via Nanoindentation

A review of recent application of near infrared spectroscopy to wood science and technology

Effect of wood anisotropy in ultrasonic wave propagation: A ray-tracing approach

The visualization of low-molecule phenol (LMP) and copper naphthenate on treated wood using X-ray microtomography