Abstract:Reliable non-destructive testing (NDT) ultrasound systems for timber composite structures require quantitative understanding of the propagation of ultrasound beams in wood. A finite-difference time-domain (FDTD) model is described, which incorporates local anisotropy variations of stiffness, damping and density in timber elements. The propagation of pulsed air-coupled ultrasound (ACU) beams in normal and slanted incidence configurations is reproduced by direct definition of material properties (gas, solid) at each model pixel. First, the model was quantitatively validated against analytical derivations. Time-varying wavefronts in unbounded timber with curved growth rings were accurately reproduced, as well as the acoustic properties (velocity, attenuation, beam skewing) of ACU beams transmitted through timber lamellas. An experimental sound field imaging (SFI) setup was implemented at NDT frequencies (120 kHz), which for specific beam incidence positions allows spatially resolved ACU field characterization at the receiver side. The good agreement of experimental and modeled beam shifts across timber laminates allowed extrapolation of the inner propagation paths. The modeling base is an orthotropic stiffness dataset for the desired wood species. In cross-grain planes, beam skewing leads to position-dependent wave paths. They are well-described in terms of the growth ring curvature, which is obtained by visual observation of the laminate. Extraordinary refraction phenomena were observed, which lead to well-collimated quasi-shear wave coupling at grazing beam incidence angles. The anisotropic damping in cross-grain planes is satisfactorily explained in terms of the known anisotropic stiffness dataset and a constant loss tangent. The incorporation of high-resolution density maps (X-ray computed tomography) provided insight into ultrasound scattering effects in the layered growth ring structure. Finally, the combined potential of the FDTD model and the SFI setup for material property and defect inversion in anisotropic materials was demonstrated. A portable SFI demonstrator was implemented with a multi-sensor MEMs receiver array that captures and compensates for variable wave propagation paths in glued laminated timber, and improves the imaging of lamination defects.

A Review on Acoustics of Wood as a Tool for Quality Assessment

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Influence of the Grain Orientation of Wood upon Its Sound Absorption Properties

Properties evaluation and defects detection in timbers by ultrasonic non-destructive technique

Tunable Acoustic Properties Using Different Coating Systems on Resonance Spruce Wood

Research Status and Prospect of Acoustic Vibration Properties Modification of Wood Used for Soundboard

EVALUATION OF WOOD QUALITY OF PINUS MONTEZUMAE LAMB. IN A DISTURBED FOREST USING NON-DESTRUCTIVE ACOUSTIC METHODS

Mechanical Properties of Wood: A Review

Acoustoelastic Guided and Surface Waves in Waveguides with Focus on Non-Destructive Testing and Structural Health Monitoring Applications —A Review of Recent Studies

A comparative study of using static and ultrasonic material testing methods to determine the anisotropic material properties of wood

Multiscale assessment of artificial aging treatment of polysaccharides from tonewood species

Imaging of Structural Timber Based on In Situ Radar and Ultrasonic Wave Measurements: A Review of the State-of-the-Art

The Study of Wood Knots Using Acoustic Nondestructive Testing Methods.

13. The Acoustic Analysis of Violins and the Artistic Impressions Evaluated by Musicians

Perceptual evaluation of bracewood and soundboard wood variations on the preference of a steel-string acoustic guitar

Influencing Factors in Acoustic Emission Detection: A Literature Review Focusing on Grain Angle and High/Low Tree Ring Density of Scots Pine

Mechanical properties assessment of Cunninghamia lanceolata plantation wood with three acoustic-based nondestructive methods

Innovative methods of non-destructive evaluation of log quality

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing

A review of measurement methods used on standing trees for the prediction of some mechanical properties of timber

Use and sustainability of wood in acoustic guitars: An overview based on the global market