Abstract:With the rapidly growing interest in using structural timber, a need exists to inspect and assess these structures using non-destructive testing (NDT). This review article summarizes NDT methods for wood inspection. After an overview of the most important NDT methods currently used, a detailed review of Ground Penetrating Radar (GPR) and Ultrasonic Testing (UST) is presented. These two techniques can be applied in situ and produce useful visual representations for quantitative assessments and damage detection. With its commercial availability and portability, GPR can help rapidly identify critical features such as moisture, voids, and metal connectors in wood structures. UST, which effectively detects deep cracks, delaminations, and variations in ultrasonic wave velocity related to moisture content, complements GPR's capabilities. The non-destructive nature of both techniques preserves the structural integrity of timber, enabling thorough assessments without compromising integrity and durability. Techniques such as the Synthetic Aperture Focusing Technique (SAFT) and Total Focusing Method (TFM) allow for reconstructing images that an inspector can readily interpret for quantitative assessment. The development of new sensors, instruments, and analysis techniques has continued to improve the application of GPR and UST on wood. However, due to the hon-homogeneous anisotropic properties of this complex material, challenges remain to quantify defects and characterize inclusions reliably and accurately. By integrating advanced imaging algorithms that consider the material's complex properties, combining measurements with simulations, and employing machine learning techniques, the implementation and application of GPR and UST imaging and damage detection for wood structures can be further advanced.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: With the rapid growth of structural timber in construction and other applications, how to use non - destructive testing (NDT) techniques to inspect and evaluate these structures to ensure their safety and durability. Specifically, the paper focuses on imaging techniques based on ground - penetrating radar (GPR) and ultrasonic (UST) measurements. ### Specific background of the problem 1. **Importance of structural timber**: - As a sustainable, renewable and cost - effective material, wood is widely used in construction. - However, over time, wood may deteriorate due to environmental factors (such as moisture, biodegradation, etc.), affecting its structural integrity. 2. **Existing challenges**: - Traditional detection methods (such as the drill - resistance method) will cause damage to the wood, affecting its structural integrity and durability. - Although X - ray imaging can provide detailed internal information, it has health risks and environmental impacts. 3. **Need for non - destructive testing**: - Develop and apply non - destructive testing techniques that can detect internal defects, cracks, humidity changes, etc. in wood without destroying it. - Provide quantitative evaluation to help engineers and architects better maintain and repair wooden structures. ### Main objectives of the paper The paper aims to summarize and evaluate the current state - of - the - art imaging techniques based on ground - penetrating radar (GPR) and ultrasonic (UST) measurements to solve the above problems. Specifically, it includes: - **Application of GPR**: - GPR can penetrate the wood with electromagnetic waves and reflect them back to generate internal images for detecting features such as moisture, voids, and metal connectors. - It has commercial availability and portability and can quickly identify key features. - **Application of UST**: - UST detects deep cracks, delamination and humidity - related wave - speed changes by the change in the propagation speed of ultrasonic waves in wood. - It is complementary to GPR and can provide more comprehensive detection results. - **Integrated techniques**: - Combine advanced imaging algorithms (such as synthetic aperture focusing technique SAFT and total focusing method TFM) and machine - learning techniques to further improve the imaging and damage - detection effects of GPR and UST. Through the application of these techniques, efficient, non - invasive detection of structural timber can be achieved, ensuring its long - term safety and reliability.

Imaging of Structural Timber Based on In Situ Radar and Ultrasonic Wave Measurements: A Review of the State-of-the-Art

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing

Elastic wave modes for the assessment of structural timber: ultrasonic echo for building elements and guided waves for pole and pile structures

Selected Methods of Diagnosis of Historic Timber Structures – Principles and Possibilities of Assessment

Techniques for high resolution imaging of wood structure: a review

Properties evaluation and defects detection in timbers by ultrasonic non-destructive technique

Application of Ground-Penetrating Radar for Detecting Internal Anomalies in Tree Trunks with Irregular Contours

Application Progress and Prospect of Defect Detection Technology for Timber Structure Members

Challenges in Ground-Penetrating Radar Application in Structural Elements: Determination of the Dielectric Constant of Glued Laminated Timber Case Study

Ultrasonic based defect detection in steel-reinforced laminated timber structural elements using Uniform Manifold Approximation and Projection (UMAP)

Reliability of acoustic tomography and ground-penetrating radar for tree decay detection

Radar Wave Detection of Standing Trees Internal Defect

Ultrasonic Testing of Carbon Fiber-Reinforced Polymer Composites

Innovative methods of non-destructive evaluation of log quality

Beyond What Meets the Eye: Imaging and Imagining Wood Mechanical-Structural Properties

In Situ Assessment of Structural Timber Using Stress-Wave Measurements

Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review

Scientific Computational Visual Analysis of Wood Internal Defects Detection in View of Tomography Image Reconstruction Algorithm

Analysis of Imaging Internal Defects in Living Trees on Irregular Contours of Tree Trunks Using Ground-Penetrating Radar

Defect Detection in Solid Timber Panels Using Air-Coupled Ultrasonic Imaging Techniques

Wave Propagation Technology in Non-destructive assays for Wood Qualifying in Tropical Amazon