Abstract:Active nitrogen species are widely acknowledged as pollutants that are both harmful to the environment as well as human health. Emissions from wastewater and agricultural applications contain nitrogen in many forms, but in soils and waterways nitrate (NO 3 - ) predominates due to the presence of nitrifying bacteria. In comparison to more reduced forms of nitrogen such as total ammonia (NH 3 /NH 4 + ), nitrate is not only a less versatile species from a chemical manufacturing and energy standpoint; it is also more difficult to selectively separate from wastewater streams. For instance, we have conducted considerable work on electrochemical ammonia stripping, achieving high selectivities and even enabling concentration of ammonia in the form of strong ammonium salt solutions. 1 Moreover, it is estimated that recovery of active nitrogen species from municipal and agricultural wastewaters could offset the need for ~30% of Haber-Bosch ammonia synthesis. From this perspective, it is desirable to develop catalysts that are active and selective for the conversion of nitrate to ammonia. Titanium metal has been demonstrated as a relatively active and selective catalyst for nitrate reduction to ammonia in acid; 2 however, similarly active and selective catalysts under neutral-to-alkaline conditions are a subject of active research. 3–6 Here we report on the performance of atomically dispersed titanium sites on carbon nanoflowers 7 for the reduction of nitrate to ammonia under alkaline conditions. The dispersity of these catalysts was supported by XAS (little/negligible Ti-Ti scattering, putative Ti-N and Ti-N-C scattering), STEM (visual confirmation of atoms), and XRD (no crystalline Ti phases observed). We contrast the performance of these atomically dispersed catalysts with that of bulk titanium foil, which shows comparably low activity and selectivity for nitrate reduction at similar pHs and potentials. In addition, we compare the atomically dispersed titanium catalysts with titanium nanoparticles, as a first-order check for catalyst aggregation under reductive reaction conditions. Moreover, the performances of all of these catalysts are compared with the baseline/controls of bare carbon paper, as well as carbon nanoflowers supported on carbon paper without titanium dopant. Additional control experiments include tests conducted in the absence of nitrate. These lines of evidence, together with the relatively high rate of ammonia production (>0.01 mmol / cm geo 2 / h, >10 mmol / mg Ti / h), support the notion that atomically dispersed titanium is uniquely active and selective for NO 3 RR under alkaline conditions. Further, for the above catalysts at pH ~13, we show the impacts of potential on the product distribution, including nitrogen mass balance and Faradaic efficiency. As a best practice, we demonstrate consistent closure of both metrics. Potential was varied between -0.4 V and -0.85 V vs. RHE. Partial current toward NO 3 RR increases with increasing overpotential, as another sanity check supporting the findings. Notably, in addition to observing ammonia and nitrite as products of NO 3 RR, we also checked for other stable intermediates (in addition to N 2 ) along the 8-electron reaction pathway – and as a result, we are able to report small amounts (FE ~5-10%) of hydroxylamine (NH 2 OH) product. In the specific case of atomically dispersed titanium on carbon nanoflowers, we also report on certain observed electrolyte effects, such as the incorporation of perchlorate vs. sulfate as a supporting electrolyte. We demonstrate the role of supporting salt both in modifying selectivity – e.g. sulfate suppressing HER, possibly via site-blocking – as well as in altering the carbon support itself. These observations contribute to a growing body of work that will enable the engineering of these catalysts for high-rate reduction of nitrate to ammonia, aiding both wastewater remediation and the decarbonization of ammonia synthesis. References: (1) Liu, M. J., et al. Water Res. 2020 , 169 , 115226. https://doi.org/10.1016/j.watres.2019.115226. (2) McEnaney, J. M., et al. ACS Sustain. Chem. Eng. 2020 , 8 (7), 2672–2681. https://doi.org/10.1021/acssuschemeng.9b05983. (3) Wu, Z.-Y., et al. Nat. Commun. 2021 , 12 (1), 2870. https://doi.org/10.1038/s41467-021-23115-x. (4) Liu, H., et al. Angew. Chem. Int. Ed. 2022 , 61 (23). https://doi.org/10.1002/anie.202202556. (5) Chen, F.-Y., et al. Nat. Nanotechnol. 2022 , 17 (7), 759–767. https://doi.org/10.1038/s41565-022-01121-4. (6) Murphy, E., et al. ACS Catal. 2022 , 12 (11), 6651–6662. https://doi.org/10.1021/acscatal.2c01367. (7) Chen, S., et al. J. Am. Chem. Soc. 2018 , 140 (32), 10297–10304. https://doi.org/10.1021/jacs.8b05825.

Electrocatalytic Nitrate Reduction to Ammonia at Atomically Dispersed Titanium Sites on Carbon Nanoflowers

Relating Near-Surface Ti Electrode Structure with Electrochemical Nitrate Reduction Performance Via Synchrotron X-Ray Characterization

The Role of Atomically Dispersed Transition Metal Centers for the Electrochemical Nitrate Reduction Reaction Towards Ammonia Synthesis

Asymmetric iron–titanium pairs within ultrathin TiO2 nanosheet enable high-efficiency nitrate reduction to ammonia

Isolated Rhodium Atoms Activate Porous TiO2 for Enhanced Electrocatalytic Conversion of Nitrate to Ammonia

Atomic tuning of 3D printed carbon surface chemistry for electrocatalytic nitrite oxidation and reduction to ammonia

Ti 2 O 3 Nanoparticles with Ti 3+ Sites toward Efficient NH 3 Electrosynthesis under Ambient Conditions

Ti3+ redox dynamics enabling efficient nitrate reduction to ammonia on Ti2O3

Elucidating Electrochemical Nitrate and Nitrite Reduction over Atomically-Dispersed Transition Metal Sites.

Elaborately tuning the electronic structure of single-atom nickel sites using nickel nanoparticles to markedly enhance the electrochemical reduction of nitrate into ammonia

Recent progress on Ti-based catalysts in the electrochemical synthesis of ammonia

Ni Doping Enabled Improvement in Electrocatalytic Nitrite-to-ammonia Conversion over TiO2 Nanoribbon

Unveiling selective nitrate reduction to ammonia with Co3O4 nanosheets/TiO2 nanobelt heterostructure catalyst

Evaluating Molecular Catalyst-Mediated Nitrate Reduction for Reactive Separation and Recovery of Ammonia

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Nickel-cobalt alloy nanosheet-decorated three-dimensional titanium dioxide nanobelts electrodeposited on titanium meshes for boosting selective nitrate electroreduction to ammonia

Efficient Electrocatalytic Ammonia Synthesis via Theoretical Screening of Titanate Nanosheet-Supported Single-Atom Catalysts

High-Performance Electrocatalytic Reduction of Nitrite to Ammonia under Ambient Conditions on a FeP@TiO<sub>2</sub> Nanoribbon Array

Ti2O3 Nanoparticles with Ti3+ Sites Toward Efficient NH3 Electrosynthesis under Ambient Conditions

Synergizing Fe2O3 nanoparticles on single atom Fe-N-C for nitrate reduction to ammonia at industrial current densities

Highly Durable and Selective Fe- and Mo-Based Atomically Dispersed Electrocatalysts for Nitrate Reduction to Ammonia via Distinct and Synergized NO<sub>2</sub><SUP>-</SUP> Pathways