Abstract:The electrochemical reduction of oxidized nitrogen species enables a pathway for the carbon neutral synthesis of ammonia (NH3). The most oxidized form of nitrogen, nitrate (NO3-) can be reduced to NH3 via the nitrate reduction reaction (NO3RR), which has been demonstrated at high selectivity. However, to make NH3 synthesis cost-competitive with current technologies, high NH3 partial current densities (jNH3) must be achieved to reduce the levelized cost of NH3. Here, we leverage the high NO3RR activity of Fe-based materials to synthesize a novel active particle-active support system with Fe2O3 nanoparticles supported on atomically dispersed Fe-N-C. By synergizing the activity of both nanoparticles and single atom sites, the optimized 3xFe2O3/Fe-N-C catalyst demonstrates an ultrahigh NO3RR activity, reaching a maximum jNH3 of 1.95 A cm-2 at a Faradaic efficiency (FE) for NH3 of 100% and an NH3 yield rate over 9 mmol hr-1 cm-2. Operando XANES and post-mortem XPS reveal the importance of a pre-reduction activation step, reducing the surface Fe2O3 (Fe3+) to highly active Fe0 sites, which are maintained during electrolysis, to realize the ultrahigh NO3RR activity. Durability studies demonstrate the robustness of both the Fe2O3 particles and Fe-Nx sites at highly cathodic potentials, maintaining a current of -1.3 A cm-2 over 24 hours, a near unity FENH3. This work exhibits an effective and durable active particle-active support system enhancing the performance of the NO3RR, enabling industrially relevant current densities and near 100% selectivity.

What problem does this paper attempt to address?

This paper mainly discusses how to improve the efficiency and achieve industrial current density and nearly 100% selectivity by electrochemically reducing nitrogen oxides (such as nitrates) to ammonia (NH3) through cooperative action. In this study, the authors synthesized a new catalyst, Fe2O3 nanoparticles supported on single atom Fe-N-C, forming an active particle-active support system. Through this method, they were able to achieve ultra-high nitrate reduction reaction (NO3RR) activity, with a maximum NH3 partial current density of 1.95 A cm-2, and maintained 100% Faradaic efficiency and an ammonia production rate exceeding 9 mmol hr-1 cm-2. The study found that the pre-reduction activation step is crucial for the generation of highly active surface Fe0 sites, which can be maintained during the electrolysis process, thereby achieving ultra-high NO3RR performance. In addition, this catalyst showed good durability at high cathode potentials, maintaining a current density of -1.3 A cm-2 and close to 100% Faradaic efficiency for 24 hours. The paper also emphasizes the balance between energy efficiency and NH3 partial current density when pursuing industrial-related current density. Although the current catalyst system has made progress in high selectivity, most systems have low energy efficiency at high current densities. This work demonstrates an efficient and durable active particle-active support system that can enhance the performance of NO3RR. The experimental section includes catalyst synthesis and characterization, and the structure and chemical state of the catalyst were analyzed using techniques such as electron microscopy, X-ray absorption spectroscopy, and photoelectron spectroscopy. The results indicate that although no significant electronic interaction between nanoparticles and single atomic sites was directly observed, this does not rule out the potential electronic interaction that enhances NO3RR performance during the electrochemical process. Linear sweep voltammetry and constant potential electrolysis tests demonstrated that the optimized 3xFe2O3/Fe-N-C catalyst has potential-independent selectivity in the range of -0.4 to -1.2 V vs. RHE, maintaining approximately 95-100% Faradaic efficiency and achieving high ammonia production. In addition, by adjusting the catalyst loading, the optimal catalyst conditions for the best performance were determined. In summary, this paper aims to address how to improve the efficiency and selectivity of nitrate to ammonia electrochemical conversion, providing a new strategy for environmentally friendly and economical ammonia synthesis.

Synergizing Fe2O3 nanoparticles on single atom Fe-N-C for nitrate reduction to ammonia at industrial current densities

Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst

Boosting Electrochemical Nitrate Reduction at Low Concentrations Through Simultaneous Electronic States Regulation and Proton Provision

Triple Regulations via Fe Redox Boosting Nitrate Reduction to Ammonia at Industrial Current Densities

Cu–Fe Synergistic Active Sites Boost Kinetics of Electrochemical Nitrate Reduction

Highly active electroreduction of nitrates to ammonia over a zeolitic imidazolium framework-derived Fe single-atom catalyst with sulfur-modified asymmetric active centers

Ultralow overpotential 465 mV: Ni and Fe synergistically promote the conversion of nitrate to ammonia

Coupling denitrification and ammonia synthesis via selective electrochemical reduction of nitric oxide over Fe 2 O 3 nanorods

Co3O4 nanoparticles embedded in porous carbon nanofibers enable efficient nitrate reduction to ammonia

Efficient Electrochemical Nitrate Reduction to Ammonia Driven by a Few Nanometer-Confined Built-In Electric Field

A Cu/Fe3O4@CN tandem catalyst for efficient ammonia electrosynthesis from nitrate reduction

Fe3O4 nanoparticle-decorated 3D pinewood-derived carbon for high-efficiency electrochemical nitrate reduction to ammonia

Unveiling multi-element synergy in polymetallic oxides for efficient nitrate reduction to ammonia

Boosting Electrochemical Nitrate Reduction to Ammonia by Fe Doped CuO/Co3O4 Nanosheet/Nanowire Heterostructures

Fe/Cu diatomic catalysts for electrochemical nitrate reduction to ammonia

Boosting electrocatalytic nitrate-to-ammonia of single Fe active sites via coordination engineering: From theory to experiments

Elaborately tuning the electronic structure of single-atom nickel sites using nickel nanoparticles to markedly enhance the electrochemical reduction of nitrate into ammonia

High-Performance Electrochemical Nitrate Reduction to Ammonia under Ambient Conditions Using a FeOOH Nanorod Catalyst

Enhancement of ammonia synthesis via electrocatalytic reduction of low-concentration nitrate using co-doped MIL-101(Fe) nanostructured catalysts

Electroreduction of Nitrate to Ammonia on Atomically-Dispersed Cu-N4 Active Sites with High Efficiency and Stability

Enhanced Nitrate‐to‐Ammonia Activity on Fe/ZnO Nanoparticles via Tuning Intermediate Adsorption in Alkaline Electrolyte