Abstract:Active nitrogen species are widely acknowledged as pollutants that are both harmful to the environment as well as human health. Emissions from wastewater and agricultural applications contain nitrogen in many forms, but in soils and waterways nitrate (NO 3 - ) predominates due to the presence of nitrifying bacteria. In comparison to more reduced forms of nitrogen such as total ammonia (NH 3 /NH 4 + ), nitrate is not only a less versatile species from a chemical manufacturing and energy standpoint; it is also more difficult to selectively separate from wastewater streams. For instance, we have conducted considerable work on electrochemical ammonia stripping, achieving high selectivities and even enabling concentration of ammonia in the form of strong ammonium salt solutions. 1 Moreover, it is estimated that recovery of active nitrogen species from municipal and agricultural wastewaters could offset the need for ~30% of Haber-Bosch ammonia synthesis. From this perspective, it is desirable to develop catalysts that are active and selective for the conversion of nitrate to ammonia. Titanium metal has been demonstrated as a relatively active and selective catalyst for nitrate reduction to ammonia in acid; 2 however, similarly active and selective catalysts under neutral-to-alkaline conditions are a subject of active research. 3–6 Here we report on the performance of atomically dispersed titanium sites on carbon nanoflowers 7 for the reduction of nitrate to ammonia under alkaline conditions. The dispersity of these catalysts was supported by XAS (little/negligible Ti-Ti scattering, putative Ti-N and Ti-N-C scattering), STEM (visual confirmation of atoms), and XRD (no crystalline Ti phases observed). We contrast the performance of these atomically dispersed catalysts with that of bulk titanium foil, which shows comparably low activity and selectivity for nitrate reduction at similar pHs and potentials. In addition, we compare the atomically dispersed titanium catalysts with titanium nanoparticles, as a first-order check for catalyst aggregation under reductive reaction conditions. Moreover, the performances of all of these catalysts are compared with the baseline/controls of bare carbon paper, as well as carbon nanoflowers supported on carbon paper without titanium dopant. Additional control experiments include tests conducted in the absence of nitrate. These lines of evidence, together with the relatively high rate of ammonia production (>0.01 mmol / cm geo 2 / h, >10 mmol / mg Ti / h), support the notion that atomically dispersed titanium is uniquely active and selective for NO 3 RR under alkaline conditions. Further, for the above catalysts at pH ~13, we show the impacts of potential on the product distribution, including nitrogen mass balance and Faradaic efficiency. As a best practice, we demonstrate consistent closure of both metrics. Potential was varied between -0.4 V and -0.85 V vs. RHE. Partial current toward NO 3 RR increases with increasing overpotential, as another sanity check supporting the findings. Notably, in addition to observing ammonia and nitrite as products of NO 3 RR, we also checked for other stable intermediates (in addition to N 2 ) along the 8-electron reaction pathway – and as a result, we are able to report small amounts (FE ~5-10%) of hydroxylamine (NH 2 OH) product. In the specific case of atomically dispersed titanium on carbon nanoflowers, we also report on certain observed electrolyte effects, such as the incorporation of perchlorate vs. sulfate as a supporting electrolyte. We demonstrate the role of supporting salt both in modifying selectivity – e.g. sulfate suppressing HER, possibly via site-blocking – as well as in altering the carbon support itself. These observations contribute to a growing body of work that will enable the engineering of these catalysts for high-rate reduction of nitrate to ammonia, aiding both wastewater remediation and the decarbonization of ammonia synthesis. References: (1) Liu, M. J., et al. Water Res. 2020 , 169 , 115226. https://doi.org/10.1016/j.watres.2019.115226. (2) McEnaney, J. M., et al. ACS Sustain. Chem. Eng. 2020 , 8 (7), 2672–2681. https://doi.org/10.1021/acssuschemeng.9b05983. (3) Wu, Z.-Y., et al. Nat. Commun. 2021 , 12 (1), 2870. https://doi.org/10.1038/s41467-021-23115-x. (4) Liu, H., et al. Angew. Chem. Int. Ed. 2022 , 61 (23). https://doi.org/10.1002/anie.202202556. (5) Chen, F.-Y., et al. Nat. Nanotechnol. 2022 , 17 (7), 759–767. https://doi.org/10.1038/s41565-022-01121-4. (6) Murphy, E., et al. ACS Catal. 2022 , 12 (11), 6651–6662. https://doi.org/10.1021/acscatal.2c01367. (7) Chen, S., et al. J. Am. Chem. Soc. 2018 , 140 (32), 10297–10304. https://doi.org/10.1021/jacs.8b05825.

Ti3+ redox dynamics enabling efficient nitrate reduction to ammonia on Ti2O3

Electrocatalytic NO reduction to NH3 over TiS2 nanosheets

Ti2O3 Nanoparticles with Ti3+ Sites Toward Efficient NH3 Electrosynthesis under Ambient Conditions

Ti 2 O 3 Nanoparticles with Ti 3+ Sites toward Efficient NH 3 Electrosynthesis under Ambient Conditions

Unveiling selective nitrate reduction to ammonia with Co3O4 nanosheets/TiO2 nanobelt heterostructure catalyst

Ni Doping Enabled Improvement in Electrocatalytic Nitrite-to-ammonia Conversion over TiO2 Nanoribbon

Asymmetric iron–titanium pairs within ultrathin TiO2 nanosheet enable high-efficiency nitrate reduction to ammonia

Recent progress on Ti-based catalysts in the electrochemical synthesis of ammonia

Isolated Rhodium Atoms Activate Porous TiO2 for Enhanced Electrocatalytic Conversion of Nitrate to Ammonia

Molybdenum−Modified Titanium Dioxide Nanotube Arrays as an Efficient Electrode for the Electroreduction of Nitrate to Ammonia

Ti3+ Self-Doped TiO2-x Nanowires for Efficient Electrocatalytic N2 Reduction to NH3.

Nickel-cobalt alloy nanosheet-decorated three-dimensional titanium dioxide nanobelts electrodeposited on titanium meshes for boosting selective nitrate electroreduction to ammonia

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Constructing Co@TiO2 Nanoarray Heterostructure with Schottky Contact for Selective Electrocatalytic Nitrate Reduction to Ammonia

Electrocatalytic Nitrate Reduction to Ammonia at Atomically Dispersed Titanium Sites on Carbon Nanoflowers

High-efficiency electroreduction of nitrite to ammonia on a Cu@TiO 2 nanobelt array.

Enhanced electrocatalytic nitrite reduction to ammonia over P-doped TiO<sub>2</sub> nanobelt array

Relating Near-Surface Ti Electrode Structure with Electrochemical Nitrate Reduction Performance Via Synchrotron X-Ray Characterization

High-efficiency electroreduction of nitrite to ammonia on a Cu@TiO<sub>2</sub> nanobelt array

Defective TiO2- x for High-Performance Electrocatalytic NO Reduction toward Ambient NH3 Production

ITO@TiO2 Nanoarray: an Efficient and Robust Nitrite Reduction Reaction Electrocatalyst Toward NH3 Production under Ambient Conditions