Abstract:Active nitrogen species are widely acknowledged as pollutants that are both harmful to the environment as well as human health. Emissions from wastewater and agricultural applications contain nitrogen in many forms, but in soils and waterways nitrate (NO 3 - ) predominates due to the presence of nitrifying bacteria. In comparison to more reduced forms of nitrogen such as total ammonia (NH 3 /NH 4 + ), nitrate is not only a less versatile species from a chemical manufacturing and energy standpoint; it is also more difficult to selectively separate from wastewater streams. For instance, we have conducted considerable work on electrochemical ammonia stripping, achieving high selectivities and even enabling concentration of ammonia in the form of strong ammonium salt solutions. 1 Moreover, it is estimated that recovery of active nitrogen species from municipal and agricultural wastewaters could offset the need for ~30% of Haber-Bosch ammonia synthesis. From this perspective, it is desirable to develop catalysts that are active and selective for the conversion of nitrate to ammonia. Titanium metal has been demonstrated as a relatively active and selective catalyst for nitrate reduction to ammonia in acid; 2 however, similarly active and selective catalysts under neutral-to-alkaline conditions are a subject of active research. 3–6 Here we report on the performance of atomically dispersed titanium sites on carbon nanoflowers 7 for the reduction of nitrate to ammonia under alkaline conditions. The dispersity of these catalysts was supported by XAS (little/negligible Ti-Ti scattering, putative Ti-N and Ti-N-C scattering), STEM (visual confirmation of atoms), and XRD (no crystalline Ti phases observed). We contrast the performance of these atomically dispersed catalysts with that of bulk titanium foil, which shows comparably low activity and selectivity for nitrate reduction at similar pHs and potentials. In addition, we compare the atomically dispersed titanium catalysts with titanium nanoparticles, as a first-order check for catalyst aggregation under reductive reaction conditions. Moreover, the performances of all of these catalysts are compared with the baseline/controls of bare carbon paper, as well as carbon nanoflowers supported on carbon paper without titanium dopant. Additional control experiments include tests conducted in the absence of nitrate. These lines of evidence, together with the relatively high rate of ammonia production (>0.01 mmol / cm geo 2 / h, >10 mmol / mg Ti / h), support the notion that atomically dispersed titanium is uniquely active and selective for NO 3 RR under alkaline conditions. Further, for the above catalysts at pH ~13, we show the impacts of potential on the product distribution, including nitrogen mass balance and Faradaic efficiency. As a best practice, we demonstrate consistent closure of both metrics. Potential was varied between -0.4 V and -0.85 V vs. RHE. Partial current toward NO 3 RR increases with increasing overpotential, as another sanity check supporting the findings. Notably, in addition to observing ammonia and nitrite as products of NO 3 RR, we also checked for other stable intermediates (in addition to N 2 ) along the 8-electron reaction pathway – and as a result, we are able to report small amounts (FE ~5-10%) of hydroxylamine (NH 2 OH) product. In the specific case of atomically dispersed titanium on carbon nanoflowers, we also report on certain observed electrolyte effects, such as the incorporation of perchlorate vs. sulfate as a supporting electrolyte. We demonstrate the role of supporting salt both in modifying selectivity – e.g. sulfate suppressing HER, possibly via site-blocking – as well as in altering the carbon support itself. These observations contribute to a growing body of work that will enable the engineering of these catalysts for high-rate reduction of nitrate to ammonia, aiding both wastewater remediation and the decarbonization of ammonia synthesis. References: (1) Liu, M. J., et al. Water Res. 2020 , 169 , 115226. https://doi.org/10.1016/j.watres.2019.115226. (2) McEnaney, J. M., et al. ACS Sustain. Chem. Eng. 2020 , 8 (7), 2672–2681. https://doi.org/10.1021/acssuschemeng.9b05983. (3) Wu, Z.-Y., et al. Nat. Commun. 2021 , 12 (1), 2870. https://doi.org/10.1038/s41467-021-23115-x. (4) Liu, H., et al. Angew. Chem. Int. Ed. 2022 , 61 (23). https://doi.org/10.1002/anie.202202556. (5) Chen, F.-Y., et al. Nat. Nanotechnol. 2022 , 17 (7), 759–767. https://doi.org/10.1038/s41565-022-01121-4. (6) Murphy, E., et al. ACS Catal. 2022 , 12 (11), 6651–6662. https://doi.org/10.1021/acscatal.2c01367. (7) Chen, S., et al. J. Am. Chem. Soc. 2018 , 140 (32), 10297–10304. https://doi.org/10.1021/jacs.8b05825.

Atomic tuning of 3D printed carbon surface chemistry for electrocatalytic nitrite oxidation and reduction to ammonia

Nickel-cobalt alloy nanosheet-decorated three-dimensional titanium dioxide nanobelts electrodeposited on titanium meshes for boosting selective nitrate electroreduction to ammonia

Electrocatalytic Nitrate Reduction to Ammonia at Atomically Dispersed Titanium Sites on Carbon Nanoflowers

Ni Doping Enabled Improvement in Electrocatalytic Nitrite-to-ammonia Conversion over TiO2 Nanoribbon

Elaborately tuning the electronic structure of single-atom nickel sites using nickel nanoparticles to markedly enhance the electrochemical reduction of nitrate into ammonia

Relating Near-Surface Ti Electrode Structure with Electrochemical Nitrate Reduction Performance Via Synchrotron X-Ray Characterization

Selective Nitrate Electroreduction to Ammonia on CNT Electrodes with Controllable Interfacial Wettability

Boosting nitrogen electrocatalytic fixation by three-dimensional TiO2−δNδ nanowire arrays

Interfacial Defect Engineering Triggered by Single Atom Doping for Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia

Electrodeposited Ni‐Mo‐P Nanoparticles on TiO2 Nanoribbon Array for Electrocatalytic Ammonia Synthesis by Reducing Nitrite

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

The in situ decoration of Ti3C2 quantum dots on Cu nanowires for highly efficient electrocatalytic reduction of nitric oxide to ammonia

Unveiling selective nitrate reduction to ammonia with Co3O4 nanosheets/TiO2 nanobelt heterostructure catalyst

Ti3+ redox dynamics enabling efficient nitrate reduction to ammonia on Ti2O3

Ambient ammonia production via selective electroreduction of nitrite by NiCu@TiO2 nanoribbon array

Rational Construction of Heterostructured Cu<sub>3</sub>P@TiO<sub>2</sub> Nanoarray for High-Efficiency Electrochemical Nitrite Reduction to Ammonia

Atomic‐Layer‐Deposited Oxygen‐Deficient TiO2 on Carbon Cloth: an Efficient Electrocatalyst for Nitrogen Fixation

Electrochemical Behavior of Ti-Based Nano-Electrode for Highly Efficient Denitrification in Synthetic Groundwater

High-Performance Electrocatalytic Reduction of Nitrite to Ammonia under Ambient Conditions on a FeP@TiO<sub>2</sub> Nanoribbon Array

Molybdenum−Modified Titanium Dioxide Nanotube Arrays as an Efficient Electrode for the Electroreduction of Nitrate to Ammonia

Electrodeposited Ni‐Mo‐P nanoparticles on TiO 2 nanoribbon array for electrocatalytic ammonia synthesis by reducing nitrite