Abstract:The Ti/CNT/Cu5‐Pd5, which has high denitrification ability and N2 selectivity, was prepared by adjusting the ratio of copper to palladium metal, and used as cathode in biochar substrate biofilm reactor effectively improved the removal of nitrate nitrogen in simulated groundwater with a low C/N ratio. To enhance the removal of nitrate nitrogen (NO3−‐N) in groundwater with a low C/N ratio, electrocatalytic reduction of NO3−‐N has received extensive attention since its electrons can be directly produced in situ while simultaneously providing a clean electronic donor of hydrogen for denitrifying bacteria. In this study, Ti/CNT/CuPd bimetallic catalytic electrodes with different copper‐palladium (CuPd) ratios were prepared by electrodeposition onto carbon nanotube (CNT) using titanium (Ti) plates. The results showed that the NO3−‐N conversion rate by Ti/CNT/Cu5‐Pd5 electrode was the highest (53.60%) compared with other CuPd electrode ratios because of the combined role of the copper's high NO3−‐N catalytic activity and the palladium's high N2 selectivity. A new type of electrode biofilm reactor (EBR) with Ti/CNT/Cu5‐Pd5 cathode, biochar substrate was constructed to explore the removal ability of NO3−‐N in simulated low C/N groundwater. When the influent NO3−‐N concentration was 30 mg/L, under the condition of a 30 mA electronic current and hydraulic retention time (HRT) of 12 h, the removal rate of NO3−‐N could reach as high as 78.1 ± 1.2%, and the N2 conversion rate was 99.7%. The horizontal distribution of microbial communities in EBR showed that the denitrification capacity was significantly improved through the electrochemical catalytic reduction of the Ti/CNT/Cu5‐Pd5 cathode and the supply of the hydrogen electron donor to autotrophic denitrogenerating microbes such as Anaerobacillus, Thauera, and Hydrophaga. This study provides a new bimetallic catalytic cathode to enhance the removal of NO3−‐N in groundwater with a low C/N ratio. Practitioner Points The Cu5Pd5/CNTs/Ti electrode is beneficial to the adsorption and reduction of NO3−‐N to N2. The production of hydrogen electron donors by cathode promoted nitrogen degradation. Activated electrodes together with denitrifying microorganisms contributed to the improved N removal rate.

Electrochemical Behavior of Ti-Based Nano-Electrode for Highly Efficient Denitrification in Synthetic Groundwater

Design and Applications of Ti Nano-Electrode for Denitrification of Groundwater

Ti Nano Electrode Fabrication for Electrochemical Denitrification Using Box–Behnken Design

Development and Reaction Mechanism of Efficient Nano Titanium Electrode: Reconstructed Nanostructure and Enhanced Nitrate Removal Efficiency

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

Fabrication and Characterization of a Ni-TNTA Bimetallic Nanoelectrode to Electrochemically Remove Nitrate from Groundwater.

Efficient Nano Titanium Electrode Via a Two-Step Electrochemical Anodization with Reconstructed Nanotubes: Electrochemical Activity and Stability.

Fabrication and Characterization of Cu/Ti Bilayer Nanoelectrode for Electrochemical Denitrification

Enhanced electrochemical nitrate removal from groundwater by simply calcined-TNPs with modified surface characters

Fabrication And Characterization Of Pd-Tnps Bimetallic Nanoelectrode For Electrochemical Denitrification From Groundwater

Fabrication and Characterization of a Cu-Zn-TiO2 Nanotube Array Polymetallic Nanoelectrode for Electrochemically Removing Nitrate from Groundwater

Fabrication and Characterization of a Cu-Zn-TiO<sub>2</sub>Nanotube Array Polymetallic Nanoelectrode for Electrochemically Removing Nitrate from Groundwater

Fabrication and Characterization of a Cu-Pd-TNPs Polymetallic Nanoelectrode for Electrochemically Removing Nitrate from Groundwater.

Nickel-cobalt alloy nanosheet-decorated three-dimensional titanium dioxide nanobelts electrodeposited on titanium meshes for boosting selective nitrate electroreduction to ammonia

Performance and microbial response to nitrate nitrogen removal from simulated groundwater by electrode biofilm reactor with Ti/CNT/Cu5‐Pd5 catalytic cathode

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Highly efficient electrochemical reduction of nitrate to ammonia on cobalt doped Ti3C2 MXene nanosheets

Efficient electrocatalysis for denitrification by using TiO2 nanotube arrays cathode and adding chloride ions

Atomic tuning of 3D printed carbon surface chemistry for electrocatalytic nitrite oxidation and reduction to ammonia

Efficient electrocatalytic nitrate reduction via boosting oxygen vacancies of TiO2 nanotube array by highly dispersed trace Cu doping

Improvement on Electrochemical Reduction of Nitrate in Synthetic Groundwater by Reducing Anode Surface Area