Abstract:Simple and convenient preparation method with high catalytic reduction activity is crucial for the remediation of nitrate contamination. In this study, the innovation for fabricating a nanoelectrode was developed by calcinating the anodized plate to alter the surface crystalline phase of the material. The prepared calcined Ti nano-pores (TNPs) electrode could effectively remove up to 95.1% nitrate from simulated groundwater at 30 mA·cm –2 electrolysis for 90 min, while under the same conditions, the removal efficiency of nano electrode prepared by conventional methods was merely 52.5%. SEM images indicated that the calcined-TNPs nanoelectrode was porous with different pore sizes. The higher nitrate removal efficiency of TNPs-500 (95.1%) than TNPs-400 (77.5%) and TNPs-550 (93.4%) may resulted from the positive nonlinear response of the larger ECSA, the improved electron transfer and suitable surface structure, and not the "anatase-to-rutile" of surface TiO 2 nanotubes. After 90 min of electrolysis, by using RuO 2 as an anode and adding 0.3 g·L –1 NaCl solution, 87.5% nitrate was removed, and the by-products (ammonia and nitrite) were negligible. Increased temperature and alkaline conditions can enhance the nitrate removal, while higher initial nitrate concentration only improved the nitrate removal slightly. Moreover, The TNPs-500 electrode also exhibited excellent nitrate removal performance in real groundwater with the efficiency at 82.9% and 92.1% after 90 and 120 min, which were 0.87 (removal efficiency=95.1%), 0.92 (removal efficiency=100%) of the efficiency for simulated groundwater, indicating the widely applicable conditions of the TNPs-500 electrode. This approach of surface bonded elements and structure modification through calcination significantly improves catalytic activity, and will guide the simple designing of functional nanostructured electrodes with wide application conditions.

Efficient Nano Titanium Electrode Via a Two-Step Electrochemical Anodization with Reconstructed Nanotubes: Electrochemical Activity and Stability.

Development and Reaction Mechanism of Efficient Nano Titanium Electrode: Reconstructed Nanostructure and Enhanced Nitrate Removal Efficiency

Electrochemical Behavior of Ti-Based Nano-Electrode for Highly Efficient Denitrification in Synthetic Groundwater

Fabrication and Characterization of a Ni-TNTA Bimetallic Nanoelectrode to Electrochemically Remove Nitrate from Groundwater.

Highly Efficient and Self-Supported 3D Carbon Nanotube Composite Electrode for Enhanced Oxygen Reduction Reaction

A 3D Electrode of Core@shell Branched Nanowire TiN@Ni0.27Co2.73O4 Arrays for Enhanced Oxygen Evolution Reaction

Ti Nano Electrode Fabrication for Electrochemical Denitrification Using Box–Behnken Design

Development of Double-Side Ordered Membrane Electrode Assembly Based on Titanium Nitride Nanoarrays

Fabrication and Characterization of Cu/Ti Bilayer Nanoelectrode for Electrochemical Denitrification

Fabrication and Characterization of a Cu-Zn-TiO2 Nanotube Array Polymetallic Nanoelectrode for Electrochemically Removing Nitrate from Groundwater

Fabrication and Characterization of a Cu-Zn-TiO<sub>2</sub>Nanotube Array Polymetallic Nanoelectrode for Electrochemically Removing Nitrate from Groundwater

Electrochemical oxidation of reverse osmosis concentrates using enhanced TiO2-NTA/SnO2-Sb anodes with/without PbO2 layer

Design and Applications of Ti Nano-Electrode for Denitrification of Groundwater

Preparation of High Efficient Photoelectrode of N–F-codoped TiO2 Nanotubes

A biocompatible titanium nitride nanorods derived nanostructured electrode for biosensing and bioelectrochemical energy conversion.

Electrochemical Method for Synthesis of a ZnFe2O4/TiO2 Composite Nanotube Array Modified Electrode with Enhanced Photoelectrochemical Activity

Enhanced electrochemical nitrate removal from groundwater by simply calcined-TNPs with modified surface characters

Treatment of Ni-EDTA containing wastewater by electrochemical degradation using Ti<SUP>3+</SUP> self-doped TiO<sub>2</sub> nanotube arrays anode

Nickel-cobalt alloy nanosheet-decorated three-dimensional titanium dioxide nanobelts electrodeposited on titanium meshes for boosting selective nitrate electroreduction to ammonia

Fabrication And Characterization Of Pd-Tnps Bimetallic Nanoelectrode For Electrochemical Denitrification From Groundwater

In situ evolution of electrocatalysts for enhanced electrochemical nitrate reduction under realistic conditions