Abstract:Current researches mainly focus on the investigations of the valve plate utilizing pressure relief grooves. However, air-release and cavitation can occur near the grooves. The valve plate utilizing damping holes show excellent performance in avoiding air-release and cavitation. This study aims to reduce the noise emitted from an axial piston pump using a novel valve plate utilizing damping holes. A dynamic pump model is developed, in which the fluid properties are carefully modeled to capture the phenomena of air release and cavitation. The causes of different noise sources are investigated using the model. A comprehensive parametric analysis is conducted to enhance the understanding of the effects of the valve plate parameters on the noise sources. A multi-objective genetic algorithm optimization method is proposed to optimize the parameters of valve plate. The amplitudes of the swash plate moment and flow rates in the inlet and outlet ports are defined as the objective functions. The pressure overshoot and undershoot in the piston chamber are limited by properly constraining the highest and lowest pressure values. A comparison of the various noise sources between the original and optimized designs over a wide range of pressure levels shows that the noise sources are reduced at high pressures. The results of the sound pressure level measurements show that the optimized valve plate reduces the noise level by 1.6 dB(A) at the rated working condition. The proposed method is effective in reducing the noise of axial piston pumps and contributes to the development of quieter axial piston machines.

Design Optimization of Valve Plate of a Bi-directional Axial Piston Pump for Electro Hydrostatic Actuation Systems

Noise Reduction of an Axial Piston Pump by Valve Plate Optimization

Flow characteristics simulation and low-noise design of fuel piston pump

Multi-objective Optimization of Micron-Scale Surface Textures for the Cylinder/valve Plate Interface in Axial Piston Pumps

A New Design Method for the Transition Region of the Valve Plate for an Axial Piston Pump

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Valve Plate Structural Optimal Design and Flow Field Analysis for the Aviation Bidirectional Three-Port Piston Pump

Research on Multi-Objective Optimization of Low Pulsation Unloading Damping Groove of Axial Piston Pump

Comparative Study on Asymmetric and Symmetric Configurations of Valve Plates in Axial Piston Pumps

Analysis and Optimization on U-shaped Damping Groove for Flow Ripple Reduction of Fixed Displacement Axial-Piston Pump

Pressure and Flow Characteristic Modeling of Water Hydraulic Axial Piston Pump Based on Variable Fluid Properties

Nonlinear Supply Pressure Control for a Variable Displacement Axial Piston Pump

Optimization of the Outlet Unloading Structure to Prevent Gaseous Cavitation in a High-Pressure Axial Piston Pump

Multi-objective Optimization Method of Valve Plate in Electro-hydrostatic Actuator Pumps

Flow Ripple Reduction of Axial-Piston Pump by Structure Optimizing of Outlet Triangular Damping Groove

Optimization of Cross Angle Based on the Pumping Dynamics Model

Optimization of Valve Plate Applied in Secondary Unit and Noise Reduction

Multi-objective Drive Forward Design with Damping Orifice and Groove for Axial Piston Pump

Effect of Surface Texture on Wear Reduction of the Tilting Cylinder and the Valve Plate for a High-Speed Electro-Hydrostatic Actuator Pump

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

A Novel Pulsation Attenuator for Aircraft Piston Pump