Abstract:Current researches mainly focus on the investigations of the valve plate utilizing pressure relief grooves. However, air-release and cavitation can occur near the grooves. The valve plate utilizing damping holes show excellent performance in avoiding air-release and cavitation. This study aims to reduce the noise emitted from an axial piston pump using a novel valve plate utilizing damping holes. A dynamic pump model is developed, in which the fluid properties are carefully modeled to capture the phenomena of air release and cavitation. The causes of different noise sources are investigated using the model. A comprehensive parametric analysis is conducted to enhance the understanding of the effects of the valve plate parameters on the noise sources. A multi-objective genetic algorithm optimization method is proposed to optimize the parameters of valve plate. The amplitudes of the swash plate moment and flow rates in the inlet and outlet ports are defined as the objective functions. The pressure overshoot and undershoot in the piston chamber are limited by properly constraining the highest and lowest pressure values. A comparison of the various noise sources between the original and optimized designs over a wide range of pressure levels shows that the noise sources are reduced at high pressures. The results of the sound pressure level measurements show that the optimized valve plate reduces the noise level by 1.6 dB(A) at the rated working condition. The proposed method is effective in reducing the noise of axial piston pumps and contributes to the development of quieter axial piston machines.

Multi-objective Drive Forward Design with Damping Orifice and Groove for Axial Piston Pump

A New Design Method for the Transition Region of the Valve Plate for an Axial Piston Pump

Noise Reduction of an Axial Piston Pump by Valve Plate Optimization

Research on Multi-Objective Optimization of Low Pulsation Unloading Damping Groove of Axial Piston Pump

Flow Ripple Reduction of Axial-Piston Pump by Structure Optimizing of Outlet Triangular Damping Groove

Analysis and Optimization on U-shaped Damping Groove for Flow Ripple Reduction of Fixed Displacement Axial-Piston Pump

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump

Simulation Research on Distribution Method of Axial Piston Pump Utilizing Pressure Equalization Mechanism

Study on Effect of Relief Groove Angle Expressing the Position in Reducing Noise of Swash Plate Axial Piston Pump

The Design for the Slipper Pair of the Axial Piston Pump Used as a High Pressure Pump in Seawater Desalination

Optimum design of piloted large flow and high speed onoff valve

Experimental Investigation on the Noise Reduction of an Axial Piston Pump Using Free-Layer Damping Material Treatment

Optimization of the Outlet Unloading Structure to Prevent Gaseous Cavitation in a High-Pressure Axial Piston Pump

Theoretical and Simulation Investigations on Flow Ripple Reduction of Axial Piston Pumps Using Nonuniform Distribution of Pistons

Effect of Damping Groove on Flow Dynamics and Vibration Characteristics of Axial Piston Pump

Optimization of Valve Plate Applied in Secondary Unit and Noise Reduction

Simulation on noise reduction of tandem axial piston pump utilizing indexing angle

Multi-objective Optimization of Micron-Scale Surface Textures for the Cylinder/valve Plate Interface in Axial Piston Pumps

Flow Ripple Reduction of an Axial Piston Pump by a Combination of Cross-Angle and Pressure Relief Grooves: Analysis and Optimization

Theoretical Study of Flow Ripple for an Aviation Axial-Piston Pump with Damping Holes in the Valve Plate

Multi-objective Optimization Method of Valve Plate in Electro-hydrostatic Actuator Pumps