Abstract:Hydropower has been the leading renewable source and cheapest ways to generate electrical energy in the world. In recent years, there has been a major upsurge in the hydropower development because of the use of pump as turbine (PAT). However, the operational reliability of a PAT is greatly affected by the unsteady flow fields; therefore, it is important to examine the unsteady flow behavior which can be used as a reference to reduce the noise, vibration, and cavitation performance for centrifugal pumps working as turbines. Thus, the objective of this study was to evaluate the unsteady flow fields by analyzing the distribution of the pressure pulsations using both numerical and experimental measurements in a PAT operating in pump mode. Firstly, the three‐dimensional (3D) unsteady flow equations were solved using SST <i>k‐</i>ω turbulence model during the numerical calculations. Secondly, the numerical results of the hydraulic pump performance were validated by the experimental measurements for numerical accuracy. Lastly, pressure transducers are positioned at certain monitoring points to measure the pressure in the PAT investigated. The numerical and experimental results show that the main frequency of the pressure pulsation is equal to the blade frequency, and as it deviates from the design operating condition, the magnitude of pressure pulsation intensifies. Furthermore, the impeller eye marked the lowest pressure coefficients especially at the design condition and makes it highly susceptible to cavitation. High pressure coefficients were obviously seen at the pressure side on the blade surface closer to the trailing edge at all studied operating conditions. Meanwhile, the rotor‐stator interaction generated the highest pressure pulsation distribution at the volute tongue. Thus, modification of the volute tongue is an optimal approach of reducing the pressure pulsation intensity in the volute and pump as a whole.

A Novel Pulsation Attenuator for Aircraft Piston Pump

Experimental analysis of attenuators in hydraulic circuits

Investigations on Pulsation-Reduction Characteristics of Hydraulic Attenuator Based on Experimental Method

Flow characteristics simulation and low-noise design of fuel piston pump

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Research Status, Critical Technologies, and Development Trends of Hydraulic Pressure Pulsation Attenuator

Numerical Study on a Compound Hydraulic Pulsation Attenuator Based on String-Fluid Resonance

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Investigation of the Pulsation-Reduction Characteristics of an Expansion Chamber Attenuator in a Hydraulic System

An Investigation into the Swash Plate Vibration and Pressure Pulsation of Piston Pumps Based on Full Fluid-Structure Interactions

Research on Multi-Objective Optimization of Low Pulsation Unloading Damping Groove of Axial Piston Pump

Attenuating Characteristics of a Multi-Element Buffer Bottle in an Aircraft Piston Pump

Optimization of the Outlet Unloading Structure to Prevent Gaseous Cavitation in a High-Pressure Axial Piston Pump

Investigation into the Effects of the Variable Displacement Mechanism on Swash Plate Oscillation in High-Speed Piston Pumps

Research on Pressure Pulsation Characteristics of Axial Piston Pump Based on Virtual Prototype

Simulation Research on Distribution Method of Axial Piston Pump Utilizing Pressure Equalization Mechanism

Noise Reduction of an Axial Piston Pump by Valve Plate Optimization

Analysis and Optimization on U-shaped Damping Groove for Flow Ripple Reduction of Fixed Displacement Axial-Piston Pump

A New Design Method for the Transition Region of the Valve Plate for an Axial Piston Pump

A pressure compensation method and its application in cavitation suppression of swash plate axial piston pump

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump