Abstract:High-speed, pressure-compensated variable displacement piston pumps are widely used in aircraft hydraulic systems for their high power density. The swash plate is controlled by the pressure-compensated valve, which uses pressure feedback so that the instantaneous output flow of the pump is exactly enough to maintain a presetting pressure. The oscillation of the swash plate is one of the major excitation sources in the high-speed piston pump, which may cause lower efficiency, shorter service life, and even serious damage. This paper presents an improved model to investigate the influence of the variable displacement mechanism on the swash plate oscillation and introduces some feasible ways to reduce oscillation of the swash plate. Most of the variable structural parameters of the variable displacement mechanism are taken into consideration, and their influences on swash plate oscillation are discussed in detail. The influence of the load pipe on the oscillation of the swash plate is considered in the improved model. A test rig is built and similarities between the experiments and simulated results prove that the simulation model can effectively predict the variable displacement mechanism state. The simulation results show that increasing the volume of the outlet chamber, the spring stiffness of the control valve, the action area of the actuator piston, and offset distance of the actuator piston can significantly reduce the oscillation amplitude of the swash plate. Furthermore, reducing the diameter of the control valve spool and the dead volume of the actuator piston chamber can also have a positive effect on oscillation amplitude reduction.

Investigation of the Pulsation-Reduction Characteristics of an Expansion Chamber Attenuator in a Hydraulic System

Investigations on Pulsation-Reduction Characteristics of Hydraulic Attenuator Based on Experimental Method

Experimental analysis of attenuators in hydraulic circuits

Numerical Study on a Compound Hydraulic Pulsation Attenuator Based on String-Fluid Resonance

Analysis of force and leakage in water hydraulic motor' s piston pairs

Filtering Characteristics of String Hydraulic Pulsation Attenuator

Analysis and Experimental Research on Efficiency Characteristics of a Deep-Sea Hydraulic Power Source

Experimental Study on Air-Hydraulic Brake System

Experimental Research on Performance of Water Hydraulic Internal Gear Pump

Investigations of the Micro Surface Shape for the Gear-Shaft/journal-bearing Interface in Water Hydraulic Internal Gear Pumps

The Design for the Slipper Pair of the Axial Piston Pump Used as a High Pressure Pump in Seawater Desalination

A Novel Pulsation Attenuator for Aircraft Piston Pump

Experimental Study of an Insert and Its Influence on Churning Losses in a High-Speed Electro-Hydrostatic Actuator Pump of an Aircraft

Study On Acoustic Performance Of A Water Muffler For Gear Pump

Research Status, Critical Technologies, and Development Trends of Hydraulic Pressure Pulsation Attenuator

Improving Performance of a Resonant String-Based Pulsation Attenuator in Hydraulic Systems

Investigation into the Effects of the Variable Displacement Mechanism on Swash Plate Oscillation in High-Speed Piston Pumps

Analytical study on hydrodynamic performance of wave-power device with bottom-pivoted flap

Design Method of Water Jet Pump Towards High Cavitation Performances

Hydrodynamic Performance of a Rectangular Floating Breakwater with and Without Pneumatic Chambers: an Experimental Study

System Design and Characteristic Analysis of Intelligent Follow-up Hydraulic Muffler