Abstract:In a wireless power transfer (WPT) system, the coil- to-coil transfer efficiency is significantly influenced by the performance of coupling coils. The self-resonant coil is widely employed for its excellent performance. Existing coil modeling methods suffer from significant errors or computational complexity, making them unsuitable for the design and optimization of coils. This article presents a modified analytical method for self-resonant coil modeling, with a specific focus on calculating the self-resonant frequency (SRF), ohmic resistance, and quality factor. First, considering the nonidentical current distribution along the self-resonant coil, a segmented filament model is formulated to calculate the SRF and current distribution. Furthermore, the uneven current density distribution on the wire's cross section is considered, and a modified segmented filament model is presented, where the current density is equated to a conduction current filament plus a pair of proximity current dipoles. The magnetic field arising from neighboring wires can, then, be calculated, enabling the determination of ohmic resistance and quality factor. Simulation and measurement results validate the accuracy of the modified model for both tightly and loosely wound coils. This model is employed to optimize the ohmic resistance and quality factor during the coil design process. To further enhance the quality factor across the entire operating frequency range, an unequal-pitch coil structure is proposed, along with a novel design guideline for coil optimization. Following this guideline, a 6.71 MHz unequal-pitch self-resonant coil is designed, fabricated, and measured. The coil-to-coil transfer efficiency reaches 95.8% and 82.7% at a transfer distance-to-coil diameter ratio of 1 (d(TR) = 20 cm) ) and 2 (d(TR) = 40 cm ), respectively. Furthermore, an experimental prototype of a high-efficiency mid-range WPT system is constructed using the optimized coils. Specifically, the overall efficiency of the WPT system reaches 81.2% when d(TR) = 20 cm and 63.2% when d(TR) = 40 cm.

Characterization of the Quality Factor in Spiral Coil Designs for High-Frequency Wireless Power Transfer Systems using Machine Learning

Accurate Evaluation of RF Coil-Tissue Interactions Using a Hybrid FDTD-MoM Method

An End-to-End Neural Network for Complex Electromagnetic Simulations

Optimization of Spiral Coil Design for WPT Systems using Machine Learning

Distributed Parameters and Resonant Frequency Computation for Resonant Coil Used in Wireless Power Transfer

Analysis of the Double-Layer Printed Spiral Coil for Wireless Power Transfer

Optimal design of wireless power transfer coils for biomedical implants using machine learning and meta-heuristic algorithms

Parameter Optimization of Wireless Power Transfer Based on Machine Learning

Design and analysis of a high quality factor multipath spiral inductor

Design of Coaxial Coils Using Hybrid Machine Learning.

Modeling and Characterization of Scaling Factor of Flexible Spiral Coils for Wirelessly Powered Wearable Sensors

Precise Parameterized Modeling of Coil Inductance in Wireless Power Transfer Systems

Precise Modeling of Mutual Inductance for Planar Spiral Coils in Wireless Power Transfer and Its Application

Combining finite element and reinforcement learning methods to design superconducting coils of saturated iron-core superconducting fault current limiter in the DC power system

Modeling and Simulation of Spiral Inductors in Wafer Level Packaged RF/Wireless Chips

The Design and Simulation of Wireless Charging Coil using Maxwell for Implantable Devices

Wide-Band Modeling On-Chip Spiral Inductors Using Frequency-Dependent Conformal ADI-FDTD Method

Accurate Modeling of Coil Inductance for Near-Field Wireless Power Transfer

Design and Optimization of Unequal-Pitch Self-Resonant Helical Coils for High-Efficiency Mid-Range Wireless Power Transfer

An Effective Design Formula for Single-Layer Printed Spiral Coils with the Maximum Quality Factor (Q-Factor) in the Megahertz Frequency Range