Abstract:Next generation implantable neural interfaces are targeting devices with mm-scale form factors that are freely floating and completely wireless. Scalability to more recording (or stimulation) channels will be achieved through distributing multiple devices, instead of the current approach that uses a single centralized implant wired to individual electrodes or arrays. In this way, challenges associated with tethers, micromotion, and reliability of wiring is mitigated. This concept is now being applied to both central and peripheral nervous system interfaces. One key requirement, however, is to maximize specific absorption rate (SAR) constrained achievable wireless power transfer efficiency (PTE) of these inductive links with mm-sized receivers. Chip-scale coil structures for microsystem integration that can provide efficient near-field coupling are investigated. We develop near-optimal geometries for three specific coil structures: in-CMOS, above-CMOS (planar coil post-fabricated on a substrate), and around-CMOS (helical wirewound coil around substrate). We develop analytical and simulation models that have been validated in air and biological tissues by fabrications and experimental measurements. Specifically, we prototype structures that are constrained to a 4 mm 4 mm silicon substrate, i.e., the planar in-/above-CMOS coils have outer diameters 4 mm, whereas the around-CMOS coil has an inner diameter of 4 mm. The in-CMOS and above-CMOS coils have metal film thicknesses of 3- m aluminium and 25- m gold, respectively, whereas the around-CMOS coil is fabricated by winding a 25-m gold bonding wire around the substrate. The measured quality factors (Q) of the mm-scale Rx coils are 10.5 @450.3 MHz (in-CMOS), 24.61 @85 MHz (above-CMOS), and 26.23 @283 MHz (around-CMOS). Also, PTE of 2-coil links based on three types of chip-scale coils is measured in air and tissue environment to demonstrate tissue loss for bio-implants. The SAR-constrained maximum PTE measured (together with resonant frequencies, in tissue) are 1.64% @355.8 MHz (in-CMOS), 2.09% @82.9 MHz (above-CMOS), and 3.05% @318.8 MHz (around-CMOS).

Optimal design of wireless power transfer coils for biomedical implants using machine learning and meta-heuristic algorithms

Optimal design of inductive coupled coils for biomedical implants using metaheuristic techniques

Preference Based Multi-Objective Optimization of Non-resonant Wireless Charging System

Design and miniaturization of a microsystem to power biomedical implants using grey wolf optimizer-based cuckoo search algorithm

Optimization of Magnetic Coupling Structure Based on Nondominated Sorting Genetic Algorithm-II

Parameter Optimization of Wireless Power Transfer Based on Machine Learning

Design of the transmitter coil used in wireless power transfer system based on genetic algorithm

Optimization of Spiral Coil Design for WPT Systems using Machine Learning

Omnidirectional Wireless Power Transfer for Millimetric Magnetoelectric Biomedical Implants

A Novel Hybrid Coil Design and Implementation for Wireless Power Transfer Systems

Optimization of the Coupling Coefficient of the Inductive Link for Wireless Power Transfer to Biomedical Implants

The Design and Simulation of Wireless Charging Coil using Maxwell for Implantable Devices

Design and Optimization of Inductive Coils for 2Fsk-Based Power and Data Transmission for Biomedical Implants

Design and Implementation of a Hybrid Wireless Power and Communication System for Medical Implants

Optimization of a Circular Planar Spiral Wireless Power Transfer Coil Using a Genetic Algorithm

Hybrid Coils-Based Wireless Power Transfer for Intelligent Sensors

Chip-Scale Coils for Millimeter-Sized Bio-Implants

A Design Review for Biomedical Wireless Power Transfer Systems with a Three-Coil Inductive Link through a Case Study for NICU Applications

Towards Flexible Wireless Charging for Medical Implants Using Distributed Antenna System

Optimization of magnetic coupling mechanism of dynamic wireless power transfer based on NSGA-II algorithm

Wireless Power Transfer Approaches for Medical Implants: A Review