Abstract:Next generation implantable neural interfaces are targeting devices with mm-scale form factors that are freely floating and completely wireless. Scalability to more recording (or stimulation) channels will be achieved through distributing multiple devices, instead of the current approach that uses a single centralized implant wired to individual electrodes or arrays. In this way, challenges associated with tethers, micromotion, and reliability of wiring is mitigated. This concept is now being applied to both central and peripheral nervous system interfaces. One key requirement, however, is to maximize specific absorption rate (SAR) constrained achievable wireless power transfer efficiency (PTE) of these inductive links with mm-sized receivers. Chip-scale coil structures for microsystem integration that can provide efficient near-field coupling are investigated. We develop near-optimal geometries for three specific coil structures: in-CMOS, above-CMOS (planar coil post-fabricated on a substrate), and around-CMOS (helical wirewound coil around substrate). We develop analytical and simulation models that have been validated in air and biological tissues by fabrications and experimental measurements. Specifically, we prototype structures that are constrained to a 4 mm 4 mm silicon substrate, i.e., the planar in-/above-CMOS coils have outer diameters 4 mm, whereas the around-CMOS coil has an inner diameter of 4 mm. The in-CMOS and above-CMOS coils have metal film thicknesses of 3- m aluminium and 25- m gold, respectively, whereas the around-CMOS coil is fabricated by winding a 25-m gold bonding wire around the substrate. The measured quality factors (Q) of the mm-scale Rx coils are 10.5 @450.3 MHz (in-CMOS), 24.61 @85 MHz (above-CMOS), and 26.23 @283 MHz (around-CMOS). Also, PTE of 2-coil links based on three types of chip-scale coils is measured in air and tissue environment to demonstrate tissue loss for bio-implants. The SAR-constrained maximum PTE measured (together with resonant frequencies, in tissue) are 1.64% @355.8 MHz (in-CMOS), 2.09% @82.9 MHz (above-CMOS), and 3.05% @318.8 MHz (around-CMOS).

Design and Optimization of Inductive Coils for 2Fsk-Based Power and Data Transmission for Biomedical Implants

Narrowband FSK Transceiver Circuit for Wireless Power and Data Transmission in Biomedical Implants

A Dual Resonant Frequencies Tuning Circuit Based on FSK Modulation for Wireless Power and Data Transmission in Medical Implants.

Optimization of the Coupling Coefficient of the Inductive Link for Wireless Power Transfer to Biomedical Implants

Design and Optimization of a 3-Coil Inductive Link for Efficient Wireless Power Transmission

Chip-Scale Coils for Millimeter-Sized Bio-Implants

Polyimide-Based Flexible Coupled-Coils Design and Load-Shift Keying Analysis

A 13.56mhz Wireless Power and Data Transfer Receiver Achieving 75.4% Effective-Power-Conversion Efficiency with 0.1% ASK Modulation Depth and 9.2mw Output Power.

High-Performance Wireless Power and Data Transmission System for Medical Implant Devices Using ASK Modulation

Optimal design of inductive coupled coils for biomedical implants using metaheuristic techniques

Optimizing Power Transfer Efficiency in Biomedical Implants: A Comparative Analysis of SS and SP Inductive Link Topologies

A Current-Switching Communication Technique for Miniaturized Medical Implants

A Novel Design of Transcutaneous Power and Data Bidirectional Transfer System for Biomedical Implants

Optimal design of wireless power transfer coils for biomedical implants using machine learning and meta-heuristic algorithms

A 27-Mbps, 0.08-mm3 CMOS Transceiver with Simultaneous Near-field Power Transmission and Data Telemetry for Implantable Systems

Design of High Efficiency Planar Spiral Coil for Implantable Wireless Power Transfer Systems

A 70%-power transmission efficiency, 3.39 Mbps power and data telemetry over a single 13.56 MHz inductive link for biomedical implants

A Frequency-Switching Inductive Power Transfer System for Wireless, Miniaturised and Large-Scale Neural Interfaces

Design and Optimization of Coil for Transcutaneous Energy Transmission System

Design of a Low-Power, High-Data-Rate, and Crystal-Less All-Digital IR-UWB Transmitter for High-Density Neural Implants

Omnidirectional Wireless Power Transfer for Millimetric Magnetoelectric Biomedical Implants