Abstract:Next generation implantable neural interfaces are targeting devices with mm-scale form factors that are freely floating and completely wireless. Scalability to more recording (or stimulation) channels will be achieved through distributing multiple devices, instead of the current approach that uses a single centralized implant wired to individual electrodes or arrays. In this way, challenges associated with tethers, micromotion, and reliability of wiring is mitigated. This concept is now being applied to both central and peripheral nervous system interfaces. One key requirement, however, is to maximize specific absorption rate (SAR) constrained achievable wireless power transfer efficiency (PTE) of these inductive links with mm-sized receivers. Chip-scale coil structures for microsystem integration that can provide efficient near-field coupling are investigated. We develop near-optimal geometries for three specific coil structures: in-CMOS, above-CMOS (planar coil post-fabricated on a substrate), and around-CMOS (helical wirewound coil around substrate). We develop analytical and simulation models that have been validated in air and biological tissues by fabrications and experimental measurements. Specifically, we prototype structures that are constrained to a 4 mm 4 mm silicon substrate, i.e., the planar in-/above-CMOS coils have outer diameters 4 mm, whereas the around-CMOS coil has an inner diameter of 4 mm. The in-CMOS and above-CMOS coils have metal film thicknesses of 3- m aluminium and 25- m gold, respectively, whereas the around-CMOS coil is fabricated by winding a 25-m gold bonding wire around the substrate. The measured quality factors (Q) of the mm-scale Rx coils are 10.5 @450.3 MHz (in-CMOS), 24.61 @85 MHz (above-CMOS), and 26.23 @283 MHz (around-CMOS). Also, PTE of 2-coil links based on three types of chip-scale coils is measured in air and tissue environment to demonstrate tissue loss for bio-implants. The SAR-constrained maximum PTE measured (together with resonant frequencies, in tissue) are 1.64% @355.8 MHz (in-CMOS), 2.09% @82.9 MHz (above-CMOS), and 3.05% @318.8 MHz (around-CMOS).

Optimizing Power Transfer Efficiency in Biomedical Implants: A Comparative Analysis of SS and SP Inductive Link Topologies

A Method of Resonant Frequency Optimized Selection for a SP Inductive Coupled Power Transfer System

All-Detuned Three-Coil Configuration for Advantages in Inductive Power Transfer Systems

Design And Optimizations Of Solenoid Magnetic Structure For Inductive Power Transfer In Ev Applications

Optimization of the Coupling Coefficient of the Inductive Link for Wireless Power Transfer to Biomedical Implants

Safety-Optimized Inductive Powering of Implantable Medical Devices: Tutorial and Comprehensive Design Guide

Efficient Wireless Power Transfer for Biomedical Implant Application

Optimal design of inductive coupled coils for biomedical implants using metaheuristic techniques

Design and Optimization of a 3-Coil Inductive Link for Efficient Wireless Power Transmission

Simulative and Experimental Research on Wireless Power Transmission Technique in Implantable Medical Device

An Efficient Inductive Power Link Design for Retinal Prosthesis

Design and Optimization of Inductive Coils for 2Fsk-Based Power and Data Transmission for Biomedical Implants

A transcutaneous energy transmission system for artificial heart adapting to changing impedance.

Modeling and Optimization of Single-turn Printed. Coils for Powering Biomedical Implants

Design of High Efficiency Planar Spiral Coil for Implantable Wireless Power Transfer Systems

Chip-Scale Coils for Millimeter-Sized Bio-Implants

Design and Optimization of Coil for Transcutaneous Energy Transmission System

Design and Analysis of an Adaptive Transcutaneous Power Telemetry for Biomedical Implants

Modeling and Design of a Transcutaneous Resonant Capacitive Power Transfer Link for Biomedical Implants

Optimization of Transcutaneous Energy Transmission System Suitable for Implanted Devices

Standardized Design of the Transmitting Coils in Inductive Coupled Endoscope Robot Driving Systems